Description

The 330103-00-05-10-02-00 is a specific configuration of the 3300 XL 8 mm proximity probe from Bently Nevada, a key component of their widely used 3300 XL proximity transducer system. This probe features a 0 mm unthreaded length, a 50 mm (approximately 2 inches) overall case length, a total length of 1.0 meter (3.3 feet), a miniature coaxial ClickLoc connector with standard cable, and does not include any agency approvals. It is designed to precisely measure the distance between the probe tip and a conductive surface, making it suitable for both static (position) and dynamic (vibration) measurements in rotating machinery.

Application Scenarios

Consider a scenario in a pulp and paper mill where the vibration levels of critical rotating equipment, such as large electric motors driving pumps, need to be continuously monitored to prevent unexpected failures. Space constraints around the motor bearings might limit the size of the vibration sensor. The Bently Nevada 330103-00-05-10-02-00 proximity probe, with its compact 50 mm case length, can be installed in these tight spaces. When paired with a compatible extension cable and Proximitor sensor, it provides accurate and reliable vibration data, allowing plant personnel to identify potential issues like bearing wear or rotor imbalance early on, enabling proactive maintenance and preventing costly unscheduled downtime.

Parameter

Main Parameters Value/Description Product Model 330103-00-05-10-02-00 Manufacturer Bently Nevada (a Baker Hughes business) Product Category 3300 XL 8 mm Proximity Probe Unthreaded Length 0 mm – The length of the probe case without threads. Overall Case Length 50 mm (1.97 inches) – The total length of the probe casing. Total Length 1.0 meter (3.3 feet) – The combined length of the probe and its integral cable. Connector Type Miniature coaxial ClickLoc connector – Provides a secure and reliable connection. Cable Type Standard coaxial cable – Ensures good signal transmission. Agency Approvals None (00 option code) – No specific hazardous area or safety certifications included. Tip Material Polyphenylene sulfide (PPS) – Durable and chemically resistant probe tip material. Case Material AISI 303 or 304 stainless steel (SST) – Robust and corrosion-resistant probe casing.

Technical Principles and Innovative Values

• Innovation Point 1: Compact Design for Space Constraints. The 50 mm overall case length of the 330103-00-05-10-02-00 allows for installation in machinery locations with limited space, where larger probes might not fit.
• Innovation Point 2: Reliable ClickLoc Connector. The miniature coaxial ClickLoc connector ensures a secure and repeatable connection to the extension cable, preventing accidental disconnections and ensuring data integrity.
• Innovation Point 3: Integrated Cable for Ease of Installation. The 1.0-meter integral cable simplifies installation by eliminating the need for a separate probe-to-cable connection at the probe end.
• Innovation Point 4: Part of the Interchangeable 3300 XL System. This probe is fully interchangeable with other components of the 3300 XL 8 mm proximity transducer system, including extension cables and Proximitor sensors, without requiring individual matching or bench calibration.

Application Cases and Industry Value

In a wind turbine gearbox, monitoring the axial position of the main shaft is crucial to detect potential thrust bearing wear. The limited space within the nacelle often makes sensor installation challenging. The Bently Nevada 330103-00-05-10-02-00 probe, with its shorter case length, can be effectively installed to measure the axial movement. When connected to a suitable extension cable and Proximitor sensor located in a more accessible area, it provides vital data to the turbine’s condition monitoring system. This early detection of axial displacement allows for timely maintenance interventions, preventing catastrophic gearbox failures and maximizing the uptime and efficiency of the wind turbine, ultimately reducing operational costs and increasing energy production.