Technical Specifications
Main Features and Advantages
The Kollmorgen AKM21C-ANB2R-00 servo motor is distinguished by a number of features that deliver significant operational advantages. Its low-inertia design is a core benefit, enabling very fast acceleration and deceleration. This characteristic is critical for applications that require rapid start-stop cycles, as it allows for increased machine throughput and reduced cycle times. The AKM21C-ANB2R-00 also offers a high torque-to-size ratio, providing exceptional power in a compact package. This helps machine builders design smaller, more efficient systems without compromising performance.
Another key feature is the motor’s high-resolution Smart Feedback Device (SFD), which provides precise position feedback to the servo drive. This feedback is essential for maintaining accurate control and stability in demanding motion profiles. The AKM21C-ANB2R-00 has an IP65 protection rating, which ensures that it is protected against dust and low-pressure water jets, making it suitable for use in harsh industrial environments. Its robust construction and thermal design allow it to operate reliably over a wide range of temperatures. The AKM21C-ANB2R-00 is also designed for easy integration, with standard connectors and mounting options, simplifying installation and reducing commissioning time.
Application Field
The Kollmorgen AKM21C-ANB2R-00 is widely applied in industries where high-speed, precise motion is required. In the packaging industry, it is used to control filling, labeling, and carton closing machines, where its dynamic response and accuracy are crucial for maintaining high production rates. In robotics and automation, the motor is a key component in articulated arms and pick-and-place robots, providing the fast, repeatable motion needed for rapid assembly and material handling. The AKM21C-ANB2R-00 is also used in the printing industry for precise web control and print head positioning, ensuring high-quality output.
Furthermore, this motor is a popular choice for material handling systems, powering conveyors, sortation systems, and automated guided vehicles (AGVs) that require efficient and controlled movement. In medical and laboratory equipment, the AKM21C-ANB2R-00 is used in precision instruments and diagnostics machines where a compact size and reliable motion are critical. The motor’s versatility and high-performance characteristics make it a go-to solution for any application where speed, accuracy, and power density are essential for achieving optimal machine performance.
Related Products
The AKM21C-ANB2R-00 is part of a complete system and is designed to work with a number of related Kollmorgen products. The AKD-P00306-NBAN-0000 and AKD-P00606-NBAN-0000 are compatible servo drives that can be paired with the AKM21C-ANB2R-00 to form a high-performance motion control system. For different performance requirements, the AKM21E-ANB2R-00 offers a higher rated torque in a similar frame size. The AKM42G-GCC2R-00 is a larger motor from the same series used for applications requiring more power. Finally, the Kollmorgen WorkBench software is the essential tool for commissioning and tuning the AKM21C-ANB2R-00 motor with its paired drive.
Installation and Maintenance
Pre-installation preparation: Before installing the AKM21C-ANB2R-00, ensure that the mounting surface is clean, flat, and free of burrs. The motor should be mounted securely to the machine frame to prevent vibration and ensure proper alignment. Use a key on the motor shaft and ensure the coupling is properly aligned to avoid excessive side or axial loads. Connect the motor power and feedback cables to the corresponding servo drive, ensuring all connections are tight and the shielding is properly grounded to prevent electrical noise. The AKM21C-ANB2R-00 must be installed in an environment that meets the specified temperature and humidity requirements. Maintenance recommendations: The AKM21C-ANB2R-00 is a brushless motor with sealed bearings, making it a low-maintenance component. Periodically inspect the motor for any signs of physical damage, loose connections, or excessive heat. Ensure that the motor’s IP65 rating is maintained by not damaging the seals. The motor bearings are typically lubricated for life and do not require re-greasing. If a fault occurs, use the Kollmorgen WorkBench software to diagnose the issue. Any necessary repairs should be performed by qualified technical personnel.
Product Guarantee
Kollmorgen guarantees the quality and performance of the AKM21C-ANB2R-00 with a comprehensive product warranty. The motor is manufactured under strict quality control standards and undergoes extensive testing to ensure it meets the highest levels of reliability and durability. Our warranty covers defects in materials and workmanship, providing customers with confidence in their investment. Our global network of technical support specialists and application engineers is available to assist with every phase of a project, from initial system design and integration to ongoing operational support. Our commitment to the AKM21C-ANB2R-00 ensures that our customers can maximize the performance and uptime of their industrial automation systems.
MATCHED SET OF DEVLIEG ANGLE PLATES
DOALL BAND SAW 3613-0 BANDSAW & WELDER DBW-15
Lodge & Shipley 2′ X 10 Gauge Metal Shear
Hobart Mobile ARC 400A Welder w/ Perkins Disel Engine
Knoll Vaccum Rotation High Pressure Coolant Pump 1000PS
Filter VRF 150/750 High Capisity Filtration, Gun Drill
Kearney & Trecker Control System GEMINI-D CONTROL
Complete Control w/Motors
Twin City Axial Exhaust Fan, 36″ 36D6-31
Exhaust Ducted Duct Inline
Bridgeport 42 in. Series 1 2HP Milling Machine
ALUMINUM PLATE BAR 2124-T4 / 2024 38x90x4.75
Foundry KAISER Specification: FMS 3008 QQ-A-250/29
C&M Vacuum Pump w/ 5 HP Baldor Motor VM3615T
REVERE AIRCRAFT ELECTRONIC WEIGHING KIT P/N: C-55800325
