Detailed Parameter Table
Product Introduction
The KOLLMORGEN AKM33H-ACCNR-01 is a high-performance AC synchronous servo motor, part of the widely respected AKM series. As a key component in KOLLMORGEN’s motion control ecosystem, the AKM33H-ACCNR-01 is engineered to deliver exceptional torque density and dynamic performance in a compact form factor. This motor is particularly suited for demanding applications that require a balance of high torque, rapid acceleration, and precise positioning. The AKM33H-ACCNR-01 seamlessly integrates with KOLLMORGEN’s advanced servo drives, such as the AKD series, creating a powerful and efficient motion solution. Its design leverages advanced magnetics and winding techniques to provide superior power output while maintaining a compact size, making it a compelling choice for machine builders looking to reduce the footprint of their equipment without compromising on performance.
The high-torque winding of the KOLLMORGEN AKM33H-ACCNR-01 is a key differentiator, enabling it to deliver robust torque even at low speeds. This characteristic is critical for applications with high inertial loads or those requiring powerful, controlled motion. The motor is equipped with an integrated SFD (Smart Feedback Device), which provides high-resolution absolute position feedback. This feature eliminates the need for homing procedures at machine startup, saving valuable time and simplifying the control logic. The KOLLMORGEN AKM33H-ACCNR-01‘s blend of high-torque capability, dynamic response, and smart feedback technology positions it as a premier choice for achieving precise, high-performance motion in modern automation systems.
Core Advantages and Technical Highlights
The KOLLMORGEN AKM33H-ACCNR-01 offers significant advantages, including a high-torque winding that provides a substantial power boost over standard motors of the same size. This makes it ideal for applications with high static loads or those that require rapid acceleration of a heavy mass. The motor’s low-inertia rotor contributes to its excellent dynamic response, allowing for quick and precise changes in speed and direction.
Effortless Integration: The integrated SFD feedback device simplifies wiring by combining feedback and temperature sensor signals into a single cable. This reduces complexity, lowers installation costs, and improves reliability by minimizing potential points of failure. The SFD also provides electronic nameplate data, which allows compatible KOLLMORGEN drives to automatically recognize the AKM33H-ACCNR-01 and configure themselves, enabling a true plug-and-play experience.
Robustness and Durability: The AKM33H-ACCNR-01 features a sealed IP65-rated housing, providing excellent protection against dust and water jets. This makes it suitable for use in environments where splashes and airborne particles are common. The motor is built to withstand demanding industrial conditions, ensuring a long and reliable service life. The shaft is equipped with a keyway, which provides a secure and high-torque mechanical connection to the load, preventing slippage under heavy loads.
High Efficiency: The advanced design of the KOLLMORGEN AKM33H-ACCNR-01 minimizes heat generation, allowing it to operate efficiently and reliably. Lower operating temperatures prolong the life of the motor’s internal components and reduce energy consumption, contributing to a more sustainable and cost-effective system.
Typical Application Scenarios
The KOLLMORGEN AKM33H-ACCNR-01 motor is perfectly suited for a variety of challenging automation applications due to its high torque and dynamic capabilities. In the material handling industry, it is used in lifting, conveying, and sorting systems where it must move heavy loads with speed and accuracy. The AKM33H-ACCNR-01 is also a preferred choice for machine tools, such as milling and grinding machines, where precise control of the spindle or axis is crucial for achieving high-quality results. Its high torque allows it to handle cutting forces effectively.
In the robotics sector, the AKM33H-ACCNR-01 is ideal for use in medium-payload robotic arms, providing the power and responsiveness needed for complex trajectories and rapid movements. The motor’s compact design allows for integration into joint axes without adding excessive weight. In printing and packaging applications, the KOLLMORGEN AKM33H-ACCNR-01 is utilized in form-fill-seal machines, label applicators, and web handling systems. Its dynamic performance ensures synchronization and throughput are maintained even during high-speed operation. The versatility and robust design of the AKM33H-ACCNR-01 make it a reliable and powerful choice for a wide range of industrial equipment.
Related Model Recommendations
AKM33H-ACCNR-02: A variant of the AKM33H-ACCNR-01 that may have a different shaft or connector configuration, providing a slight customization for specific mechanical integration needs. AKM32D-ACCNR-00: A motor from the same frame size but with a standard winding and a different feedback device, offering an alternative for applications with different torque or feedback requirements. AKM42E-ACCNR-00: A larger and more powerful motor from the AKM series. It is an upgrade option for applications that require even higher torque and power density. AKD-N00407-NA: The corresponding KOLLMORGEN servo drive from the AKD series, designed to be paired with the AKM33H-ACCNR-01. It provides the power and control functionality necessary for the motor to operate. AKM33L-ACCNR-00: This model is likely to be a version with a lower inertia winding, suitable for applications that prioritize rapid acceleration over maximum continuous torque.
Installation, Commissioning and Maintenance Instructions
Installation preparation: Before installing the KOLLMORGEN AKM33H-ACCNR-01, ensure the mounting surface is clean, flat, and free of burrs to guarantee proper mechanical and thermal contact. Handle the motor with care, particularly the shaft, to prevent any damage to the bearings or feedback device. Before making electrical connections, confirm that all power to the drive system is off. Use the appropriate shielded cables and connectors to prevent electrical noise and ensure signal integrity. It is crucial to follow the provided pinout diagrams for the power and SFD feedback cables to ensure correct wiring and avoid damage to the motor or drive.
Maintenance suggestions: The AKM33H-ACCNR-01 is a brushless motor with sealed bearings, designed to be maintenance-free. It does not require routine lubrication or brush replacement. Maintenance is limited to periodic visual inspections of the motor housing and connections. Check for any signs of physical damage, loose connections, or unusual heat buildup. The motor’s IP65 rating provides robust protection, but it should be kept free of heavy dirt or dust buildup to ensure proper heat dissipation. If performance issues arise, the first course of action should be to use the diagnostic tools on the paired KOLLMORGEN drive, which can provide detailed status and error information for the AKM33H-ACCNR-01, allowing for efficient troubleshooting.
Service and Guarantee Commitment
KOLLMORGEN provides a robust service and guarantee commitment for the AKM33H-ACCNR-01. This includes a comprehensive warranty that covers material and workmanship defects, reflecting our commitment to high-quality manufacturing. Our global network of technical support specialists is available to provide expert assistance, from initial system design and motor sizing to on-site commissioning and long-term troubleshooting. We are dedicated to ensuring your complete satisfaction and the long-term, reliable operation of your AKM33H-ACCNR-01. Our extensive online resources, including product manuals, technical datasheets, and application notes, further empower our customers with the knowledge and tools needed to maximize the value and performance of their KOLLMORGEN products.
Alligator Jaw Compression Riveter w/ Production Table
APT 740 Rivet Tool American Pneumatic Co
ALUMINUM PLATE BAR 7050 T745148x144x1.25
Foundry Source: Specification: 5PTM7T08 Lot#
Nilfisk GS 83 Industrial High Volume 69 Liter Vacuum
ISOTEC Actuator H.I.A.S. 80 Linear Slide 85204/4/92
Allen Bradley 10KW CNC Serial Drive Servo 8520-SER10
GENERAL ELECTRIC 3 phase Transformer 300KVA 9T23B3873
RF80H Christie Battery Analyzer & Charger 119443-001
Antique Lincoln Welder SAE 300 Amp Code 409
Bijur Lubrication Pump Model D-2500 NEW
Upright Aerial Platform Portable Aluminum Scaffolding
29in, Werner, Scoffold, Narrow, replacement, Parts
Koyo Deep Groove Single Row Bearings 6840
Fanuc Motherboard – Model A16B-1010-0050/19C
100% Satisfaction Guaranteed
3M 76 Aperature Card Mounter 39DA, Eyecom Reader + more
Control Techniques Mentor II Digital DC drive
Kearney & Trecker Universal Dividing Head
100% Satisfaction Guaranteed
Control Box LA425-20 Cincinnati Milling Machine 25 HP
Replacement power cabinet, Horizontal Vertical
R&M Loadmate 1 Ton Chain Hoist w/ 2 Speed Trolley LM05
Allen Bradley 150-A180NBD Motor Controller
