Detailed Parameter Table
Product Introduction
The KOLLMORGEN AKM41E-ANCNAA00 is a premier AC synchronous servo motor, part of the widely recognized AKM series, which is engineered for optimal performance in demanding industrial applications. As a core component of KOLLMORGEN’s motion control family, the AKM41E-ANCNAA00 offers a powerful combination of high torque-to-inertia ratio and exceptional dynamic response. Its design is optimized for seamless integration with KOLLMORGEN’s servo drives, such as the AKD series, providing a cohesive and powerful motion control solution. It is built with high-energy permanent magnets and a low-cogging stator, which ensures smooth operation and precise motion, even at very low speeds.
The AKM41E-ANCNAA00 is equipped with a Smart Feedback Device (SFD), which provides high-resolution, absolute position feedback. This technology eliminates the need for homing procedures, which significantly reduces machine startup time and simplifies the overall system design. The AKM41E-ANCNAA00 is a versatile and reliable choice for machine builders seeking to improve the performance and efficiency of their automation systems.
Core Advantages and Technical Highlights
The KOLLMORGEN AKM41E-ANCNAA00 is defined by a series of technical advantages that make it a superior choice in its category. Its low inertia rotor design enables rapid acceleration and deceleration, leading to faster cycle times and improved machine throughput in high-cyclic applications. This motor’s design allows it to handle dynamic loads with exceptional agility.
Simplified Integration: The motor uses an SFD feedback device, which simplifies wiring by providing position feedback and temperature data over a single cable. This reduces the number of connectors and cables, lowers installation costs, and minimizes potential points of failure. The SFD also stores the motor’s electronic nameplate data, which compatible KOLLMORGEN drives can read automatically. This allows for a true plug-and-play experience, reducing setup time and the risk of configuration errors.
Robust Construction: The AKM41E-ANCNAA00 boasts an IP65 rating, offering robust protection against dust and water jets. This makes it suitable for use in harsh industrial environments where exposure to contaminants is a concern. The motor’s smooth shaft is ideal for use with couplings, providing a secure and precise connection. The inclusion of a Class F insulation system (155°C) ensures reliable operation at higher temperatures, extending the motor’s service life and providing a buffer against thermal overloads.
Typical Application Scenarios
The KOLLMORGEN AKM41E-ANCNAA00 motor is well-suited for a wide array of applications that demand precision and dynamic performance. In the robotics and automation industry, it is frequently used in multi-axis robots for pick-and-place, assembly, and welding applications, where its high torque-to-inertia ratio is critical for fast and accurate movements. In packaging machinery, the AKM41E-ANCNAA00 is a popular choice for form-fill-seal machines, label applicators, and carton erectors where high-speed, repeatable motion is required to meet production quotas.
Furthermore, in the semiconductor and electronics manufacturing sector, the AKM41E-ANCNAA00 is used in precision stages and handling equipment where its smooth, low-cogging motion is essential for delicate processes. In medical and laboratory equipment, the motor’s quiet operation and precise positioning are vital for diagnostic machines and fluid dispensing systems. The versatility and robust design of the KOLLMORGEN AKM41E-ANCNAA00 make it a reliable and powerful choice for a broad spectrum of industrial applications.
Related Model Recommendations
AKM41E-ACCNR00: A similar model that includes a keyway on the shaft, which may be more suitable for applications requiring a keyed connection. AKM42G-ANCNAA-00: A motor from the same frame size but with a different winding, which could offer different speed and torque characteristics depending on the specific application needs. AKM43G-ACCNR-00: A larger and more powerful motor from the AKM series, providing a significant increase in continuous stall torque and a good option for upgrading a system that requires more force. AKD-N00407-NA: The recommended servo drive from KOLLMORGEN’s AKD series, designed to be paired with the AKM41E-ANCNAA00 to provide advanced control and diagnostic capabilities. AKM41L-ACCNR00: This model is a lower-inertia winding version, which could be an alternative for applications that require faster acceleration and a higher maximum speed at the expense of continuous torque.
Installation, Commissioning and Maintenance Instructions
Installation preparation: Before installing the KOLLMORGEN AKM41E-ANCNAA00, ensure the mounting surface is clean, flat, and free of burrs to guarantee proper mechanical and thermal contact. The motor should be handled with care to prevent any damage to the shaft or connectors. All power to the drive system must be turned off before making any electrical connections. Use appropriate shielded cables and torque the mounting bolts to the recommended specifications.
Maintenance suggestions: The AKM41E-ANCNAA00 is a brushless motor with sealed bearings, making it a maintenance-free component. Routine lubrication or brush replacement is not required. Maintenance is limited to periodic visual inspections of the motor housing and connections. Check for any signs of physical damage, loose connections, or unusual heat buildup. The motor’s IP65 rating provides excellent protection, but it should be kept free of heavy dirt or debris to ensure proper heat dissipation. If performance issues arise, the first course of action should be to use the diagnostic tools on the paired KOLLMORGEN drive, which can provide detailed status and error information for the AKM41E-ANCNAA00, allowing for efficient troubleshooting.
Service and Guarantee Commitment
KOLLMORGEN provides a robust service and guarantee commitment for the AKM41E-ANCNAA00. This includes a comprehensive warranty that covers material and workmanship defects, reflecting our confidence in the product’s quality and durability. Our global network of technical support specialists is available to provide expert assistance with system design, motor sizing, commissioning, and troubleshooting. We are committed to ensuring the long-term, reliable operation of your AKM41E-ANCNAA00. Our extensive online resources, including product manuals, technical datasheets, and application notes, further empower our customers with the knowledge and tools needed to maximize the performance of their KOLLMORGEN products.
Gould Servo Motor with Dayton Blower M238-H6CC-3YOW-DM
Permanent Magnet
Jedtco 1098′ Silicone Rubber Extrusion Sponge AMS-3195
110-070-16 Medium Density 15/32 in.
K&T Motor by Inland TTRB-4501-4202-B
K&T P/N 0-224103
LEYBOLD OF-1000 Oil Filtering System
2230 FT SPECIALTY CABLE AEROSPACE HOOKUP WIRE M22759/11
Bell & Gossett Pump 5 HP
R & M LOADMATE 2 TON ELECTRIC Chane Hoist LM10 2 Speed
Angle Computer Co.Positioning Table D582
Ingersoll & Rand 1/8 Ton Electric 15FT Lift Hoist
Columbus McKinnon 1/2 Ton Electric Chain Hoist WF W F
ALUMINUM PLATE BAR 7050 T7451 36x96x1.25
Foundry Source: KAISER Specification: Lot# 338712A3
Fafnir 2MM9318WI CR DUL Superprecision Bearing Set
Heald Grinding Spindle Head Adapter 38,000 RPM 1-2A
Yale 1/2 Ton Electric Chain Hoist C6117NZ12B
HAMILTON MODEL 950S936 FIELD HOSPITAL SCRUB SINK
Tuthill FILL-RITE series 400 Pump & 100 Gallon Tank
