Detailed Parameter Table
Product Introduction
The KOLLMORGEN AKM42E-ACCNR00 is a premier AC synchronous servo motor, part of the widely respected AKM series, engineered for high-performance motion control. It is designed to deliver exceptional power and dynamic response in a compact form factor. The AKM42E-ACCNR00 is optimized for seamless integration with KOLLMORGEN’s advanced servo drives, such as the AKD series, creating a powerful and efficient motion control solution. The motor’s robust design, featuring high-energy permanent magnets, ensures smooth operation and consistent performance even at low speeds.
A key feature of the AKM42E-ACCNR00 is its Smart Feedback Device (SFD), which provides high-resolution absolute position feedback. This technology eliminates the need for homing procedures at machine startup, which significantly reduces downtime and simplifies system design. The AKM42E-ACCNR00 is a versatile and reliable choice for machine builders seeking to improve the performance and efficiency of their automation systems.
Core Advantages and Technical Highlights
The KOLLMORGEN AKM42E-ACCNR00 offers significant technical advantages that make it a superior choice for many industrial applications. Its low-inertia rotor design allows for rapid acceleration and deceleration, leading to reduced cycle times and improved machine throughput.
Simplified Wiring: The motor uses two separate connectors: an M23 for power and an M17 for feedback. This configuration ensures clear separation of power and signal lines, which is crucial for preventing electrical noise from affecting feedback signals. The SFD feedback device also provides electronic nameplate data, which compatible KOLLMORGEN drives can read automatically. This allows for a plug-and-play experience that significantly speeds up commissioning.
Robust Construction: The AKM42E-ACCNR00 has an IP65 rating, offering robust protection against dust and water jets. This makes it suitable for use in harsh industrial environments. The motor’s keyed shaft provides a secure, high-torque mechanical connection to the load, preventing slippage. The inclusion of a Class F insulation system (155°C) ensures reliable operation at higher temperatures, extending the motor’s service life.
Typical Application Scenarios
The KOLLMORGEN AKM42E-ACCNR00 is well-suited for a wide array of applications that demand precision and dynamic performance. In the robotics and automation industry, it is frequently used in multi-axis robotic arms for pick-and-place, assembly, and welding applications, where its high torque-to-inertia ratio is critical for fast and accurate movements. In material handling, the AKM42E-ACCNR00 is a popular choice for conveyors, lifters, and gantry systems.
Furthermore, in the packaging industry, the AKM42E-ACCNR00 can be used in machines that require precise motion, such as carton erectors or palletizers. In the aerospace and defense sectors, its reliability and robust design make it suitable for positioning systems and simulators. The combination of dynamic performance and a durable design makes the KOLLMORGEN AKM42E-ACCNR00 a versatile choice for a broad spectrum of industrial applications.
Related Model Recommendations
AKM42E-ACC2R00: A similar model that includes an integrated holding brake, which is essential for applications with vertical loads. AKM42E-ACSNR00: A motor from the same frame size and winding but with a different feedback type (resolver), which is ideal for very harsh, noisy environments. AKM43G-ACCNR-00: A larger and more powerful motor from the AKM series, providing a significant increase in continuous stall torque and a good option for upgrading a system that requires more force. AKD-N00407-NA: The recommended servo drive from KOLLMORGEN’s AKD series, designed to be paired with the AKM42E-ACCNR00 to provide advanced control and diagnostic capabilities. AKM42L-ACCNR00: This model is a lower-inertia winding version, which could be an alternative for applications that require faster acceleration and a higher maximum speed at the expense of continuous torque.
Installation, Commissioning and Maintenance Instructions
Installation preparation: Before installing the KOLLMORGEN AKM42E-ACCNR00, ensure the mounting surface is clean, flat, and free of burrs. All power to the drive system must be turned off before making any electrical connections. Handle the motor with care, especially the shaft and connectors. Use appropriate shielded cables and torque the mounting bolts to the recommended specifications. It is crucial to correctly wire the separate power and feedback cables, following the provided pinout diagrams.
Maintenance suggestions: The AKM42E-ACCNR00 is a brushless motor with sealed bearings, making it a maintenance-free component. Routine lubrication or brush replacement is not required. Maintenance is limited to periodic visual inspections of the motor housing and connections. Check for any signs of physical damage, loose connections, or unusual heat buildup. The motor’s IP65 rating provides excellent protection, but it should be kept free of heavy dirt or debris to ensure proper heat dissipation. If performance issues arise, use the diagnostic tools on the paired KOLLMORGEN drive, which can provide detailed status and error information for the AKM42E-ACCNR00, allowing for efficient troubleshooting.
Machlett ML-LPT-45 Triode Radar Pulse Tube
1.5 Megawatt Brand New
Heald Grinding Spindle Head Adapter 5-2 17,500 RPM
US ELECTRIC 7.5 HP GENERAL PURPOSE 3 PHASE MOTOR A036
BF GOODRICH TIRE LT 255 \ 75 R 17 111/ 108 Q
NEW Cincinnati Milacron Power Supply 1-635-0108-001
Oliver of Adrian HDACE Universal Tool & Cutter Grinder
Fafnir Angular Contact Bearing 2MM9124WI NEW
C/O#’s 7024 CD P4GA 7024 TG P/4 B7024C.TPA.P4S 124HDL
Browning Torq Guard Torque Limiter TG 800
Cushman 15″ Rotary Chuck Super Spacer 30 840 12 000A
Tennant CASTEX Flood Pumper – 1 Carpet Extractor
Whitnon High Speed Milling Spindle 12,000 RPM
Documentation included. Style 441-0030-000
Haws Portable Eye Wash and Body Spray Unit 7602.10.2
KOA Speer Spool of 5,000 Z25L Resistors 0 OHM 15 Amp
