Detailed Parameter Table
Product Introduction
The KOLLMORGEN AKM42E-ANCNR-00 is a premier AC synchronous servo motor, part of the widely respected AKM series, engineered for high-performance motion control. It is designed to deliver exceptional power and dynamic response in a compact form factor. The AKM42E-ANCNR-00 is optimized for seamless integration with KOLLMORGEN’s advanced servo drives, such as the AKD series, creating a powerful and efficient motion control solution. The motor’s robust design, featuring high-energy permanent magnets, ensures smooth operation and consistent performance even at low speeds.
A key feature of the AKM42E-ANCNR-00 is its Smart Feedback Device (SFD), which provides high-resolution absolute position feedback. This technology eliminates the need for homing procedures at machine startup, which significantly reduces downtime and simplifies system design. The AKM42E-ANCNR-00 is a versatile and reliable choice for machine builders seeking to improve the performance and efficiency of their automation systems.
Core Advantages and Technical Highlights
The KOLLMORGEN AKM42E-ANCNR-00 offers significant technical advantages that make it a superior choice for many industrial applications. Its low-inertia rotor design allows for rapid acceleration and deceleration, leading to reduced cycle times and improved machine throughput.
Simplified Wiring: The motor uses two separate connectors: an M23 for power and an M17 for feedback. This configuration ensures clear separation of power and signal lines, which is crucial for preventing electrical noise from affecting feedback signals. The SFD feedback device also provides electronic nameplate data, which compatible KOLLMORGEN drives can read automatically. This allows for a plug-and-play experience that significantly speeds up commissioning.
Robust Construction: The AKM42E-ANCNR-00 has an IP65 rating, offering robust protection against dust and water jets. This makes it suitable for use in harsh industrial environments. The motor’s smooth shaft is ideal for use with couplings, providing a secure and precise connection. The inclusion of a Class F insulation system (155°C) ensures reliable operation at higher temperatures, extending the motor’s service life.
Typical Application Scenarios
The KOLLMORGEN AKM42E-ANCNR-00 is well-suited for a wide array of applications that demand precision and dynamic performance. In the robotics and automation industry, it is frequently used in multi-axis robotic arms for pick-and-place, assembly, and welding applications, where its high torque-to-inertia ratio is critical for fast and accurate movements. In material handling, the AKM42E-ANCNR-00 is a popular choice for conveyors, lifters, and gantry systems.
Furthermore, in the packaging industry, the AKM42E-ANCNR-00 can be used in machines that require precise motion, such as carton erectors or palletizers. In the aerospace and defense sectors, its reliability and robust design make it suitable for positioning systems and simulators. The combination of dynamic performance and a durable design makes the KOLLMORGEN AKM42E-ANCNR-00 a versatile choice for a broad spectrum of industrial applications.
Related Model Recommendations
AKM42E-ACC2R00: A similar model that includes an integrated holding brake, which is essential for applications with vertical loads. AKM42E-ACCNR00: A motor from the same frame size and winding but with a keyed shaft, which is suitable for applications requiring a keyed connection. AKM43G-ACCNR-00: A larger and more powerful motor from the AKM series, providing a significant increase in continuous stall torque and a good option for upgrading a system that requires more force. AKD-N00407-NA: The recommended servo drive from KOLLMORGEN’s AKD series, designed to be paired with the AKM42E-ANCNR-00 to provide advanced control and diagnostic capabilities. AKM42L-ANCNR-00: This model is a lower-inertia winding version, which could be an alternative for applications that require faster acceleration and a higher maximum speed at the expense of continuous torque.
Installation, Commissioning and Maintenance Instructions
Installation preparation: Before installing the KOLLMORGEN AKM42E-ANCNR-00, ensure the mounting surface is clean, flat, and free of burrs. All power to the drive system must be turned off before making any electrical connections. Handle the motor with care, especially the shaft and connectors. Use appropriate shielded cables and torque the mounting bolts to the recommended specifications. It is crucial to correctly wire the separate power and feedback cables, following the provided pinout diagrams.
Maintenance suggestions: The AKM42E-ANCNR-00 is a brushless motor with sealed bearings, making it a maintenance-free component. Routine lubrication or brush replacement is not required. Maintenance is limited to periodic visual inspections of the motor housing and connections. Check for any signs of physical damage, loose connections, or unusual heat buildup. The motor’s IP65 rating provides excellent protection, but it should be kept free of heavy dirt or debris to ensure proper heat dissipation. If performance issues arise, use the diagnostic tools on the paired KOLLMORGEN drive, which can provide detailed status and error information for the AKM42E-ANCNR-00, allowing for efficient troubleshooting.
Service and Guarantee Commitment
KOLLMORGEN provides a robust service and guarantee commitment for the AKM42E-ANCNR-00. This includes a comprehensive warranty that covers material and workmanship defects, reflecting our confidence in the product’s quality and durability. Our global network of technical support specialists is available to provide expert assistance with system design, motor sizing, commissioning, and troubleshooting. We are committed to ensuring the long-term, reliable operation of your AKM42E-ANCNR-00.
Mitsubishi DC Servo Motor – Model HD 301-12
Sterling Bung Mixer – Clamp Mount Model D-075
Motor Model NBY074FCW 3/4 HP 1730 RPM
HAMMOND DUSKOLECTOR Dust Collector DK-4
Marotta Hydraulic Valve Model PLV-34B New in Box
Mitsubishi NF400-S No-Fuse 300A 600V 3P Circuit Breaker
Two Postion Grinder Polisher Wet/Dry Surface Sander
ALLEN BRADLEY 1394-AM50 A SERVO DRIVE 10KW
Bosch Rexroth Mill Type Cylinder R407999226
CDM1M00/32/18/475A2X/B11CGDMWW
1 Ton Chain Hoist – ELC 2016-3 Equivalent – 20′ Chain
Coffing 1/4 Ton Hoist Model EC-1016-3
Heald Internal Grinding Machine Spindle 8200 8,200 RPM
Pyrell Fire Retardant Foam – 575 Sq.’ – 1/2″ Thickness
Arktite AP403510 400AMP 600VAC/250VDC Plug
Werie Rietschle Vacuum Pump TLV 25
Raychem ElectroLoss Filterline
RAYCHEM – 55FB1541-20-FLT4-0CS2882
U-LINE Corp. 5.2 Cubic Ft. Refrigerator Y 55WH
INDRAMAT AC SERVO CONTROLLER TDM 3.2-030-300-WI
TDM 3.2-030-300-WI
INDRAMAT AC SERVO CONTROLLER TDM 4.1-020-200-WO
Rockwell Manufacturing Drill Press 82-910 66Y 3/4 HP
