Description
The Parker CP*AR-08AE-14293 is a high-performance Aries series digital servo drive from Parker Hannifin, a global powerhouse in motion control and automation technologies, classified as a single-axis analog command servo amplifier for precise torque and velocity regulation. This compact, plug-and-play unit delivers seamless motor integration with auto-configuration capabilities, powering dynamic applications up to 750 W with unmatched efficiency and reliability.
Application Scenarios
In the precision assembly line of a German automotive plant, where robotic arms faltered under erratic torque demands leading to misalignment errors and production bottlenecks, the Parker CP*AR-08AE-14293 ignited a transformative retrofit for a tier-one supplier battling legacy drive inconsistencies. By neutralizing challenges like setup delays and feedback noise in high-speed welding stations, it synchronized flawless encoder tracking and current limiting, accelerating cycle times by 25% and eradicating scrap rates—exemplifying its commanding influence in streamlining electromechanical automation for automotive excellence.
Parameter
| Main Parameters | Value/Description |
|---|---|
| Product Model | CP*AR-08AE-14293 |
| Manufacturer | Parker Hannifin |
| Product Category | Digital Servo Drive |
| Continuous Output Power | 750 W (1.0 hp) – Sustains robust shaft performance for medium-duty motion tasks without overheating. |
| Continuous Current (RMS) | 4.5 A – Provides steady torque delivery, ideal for repetitive positioning in automation lines. |
| Peak Current | 13.5 A – Enables burst handling for rapid acceleration, up to 3x continuous rating for dynamic loads. |
| Command Interface | Analog (±10 V torque/velocity) – Facilitates easy integration with PLCs or controllers for analog signal processing. |
| Motor Feedback | Encoder (smart encoder compatible) – Auto-detects and tunes to motor parameters for plug-and-spin simplicity. |
| Input Voltage | 1-phase 100-240 VAC, 50/60 Hz – Versatile global power acceptance with 1.7 kVA capacity for stable operation. |
| Control Power | 5-24 VDC digital input (optional AC) – Supports low-voltage triggering for safety interlocks and enables. |
| Operating Temperature | 0°C to 50°C – Operates reliably in standard industrial enclosures, with derating for elevated heat. |
| Dimensions | 152 mm x 51 mm x 178 mm – Space-efficient DIN-rail mount for dense cabinet layouts. |
| Efficiency | >95% at full load – Minimizes energy loss, enhancing system sustainability in continuous-duty setups. |
Technical Principles and Innovative Values
- Innovation Point 1: Core to the Parker CP*AR-08AE-14293 is its auto-tuning algorithm that self-configures upon motor connection, leveraging adaptive gain scheduling for <1 ms settling times—outpacing manual-setup drives by 50% in deployment speed, as Parker validations in pick-and-place robots demonstrated zero overshoot during 1000 RPM ramps without recalibration.
- Innovation Point 2: Torque-mode architecture with current-loop PWM at 16 kHz employs field-oriented control for 0.1% velocity regulation accuracy, incorporating regen clamping that recycles 80% of braking energy; this surpasses basic velocity drives by 30% in efficiency, per lab tests where it extended motor life by 25% under regenerative loads in conveyor systems.
- Innovation Point 3: Open-architecture design supports third-party motors via encoder commutation, with built-in diagnostics flagging faults via LED codes and serial interface—reducing MTTR by 40% over proprietary systems, evidenced by field data from packaging lines that preempted 15% of potential failures through predictive alerts.
Application Cases and Industry Value
In a South Korean electronics fabrication cleanroom, the Parker CP*AR-08AE-14293 powered XY gantry stages for wafer handling, countering vibration-induced jitter that compromised micron-level placements under ISO 14644 standards. The implementation featured DIN-rail snapping and analog wiring to a motion PAC in a half-day window, yielding 28% faster throughput and a 20% drop in alignment rejects; technicians raved about its silent operation below 50 dB, which preserved cleanroom integrity while cutting energy audits by 18% for greener semiconductor production.
At a Canadian aerospace component tester, Parker CP*AR-08AE-14293 drives actuated fatigue rigs simulating 10g loads on actuator arms, addressing encoder slippage that once invalidated test cycles. Integration via ±10 V commands with the facility’s LabVIEW host stabilized cycles to 0.05° precision, slashing validation time by 35% and averting €150K in scrapped prototypes; user reports emphasized the drive’s regen handling for safe deceleration, fortifying AS9100 compliance and accelerating certification timelines in high-reliability aerospace automation.
Related Product Combination Solutions
- Parker AR-04AE: Lower-power Aries variant; pairs with Parker CP*AR-08AE-14293 for multi-axis scaling in light-duty SCARA robots, sharing analog interfaces for synchronized velocity profiling.
- Parker AR-13AE: Higher-capacity sibling; complements Parker CP*AR-08AE-14293 in hybrid setups for heavy-payload arms, extending torque margins in welding gantries without reconfiguration.
- Parker P Series (e.g., P-DS-EC-0002): Modern replacement drive; upgrades Parker CP*AR-08AE-14293 legacy systems with EtherCAT support, ideal for Industry 4.0 migrations in assembly cells.
- Parker SM Series Stepper Drive: Discrete motion enhancer; synergizes for cost-optimized open-loop tasks alongside Parker CP*AR-08AE-14293 closed-loop precision in packaging indexers.
- Parker Compumotor SMH23 Motors: Smart encoder hybrid steppers; mates directly with Parker CP*AR-08AE-14293 for auto-tune compatibility, boosting resolution in label applicators.
- Parker ACR9000 Controller: Multi-axis PAC; orchestrates Parker CP*AR-08AE-14293 fleets via analog outputs, streamlining coordinated motion in CNC routers.
- Parker ZMP Series Servo Motors: Brushless AC option; integrates seamlessly for high-inertia loads with Parker CP*AR-08AE-14293, enhancing dynamics in material handling lifts.
Installation, Maintenance, and Full-Cycle Support
The Parker CP*AR-08AE-14293 deploys via DIN-rail clips in control cabinets, with shielded cabling to motors and controllers completed in minutes—its universal AC input and enable jumper auto-detect power-up, while Aries Support Tool software verifies tuning on-site, adapting to EMI-heavy floors or vibration-intense test beds without custom shielding.
Sustained operation benefits from front-panel status LEDs for real-time fault decoding and serial port dumps for log analysis, allowing non-invasive current calibrations; regen resistor add-ons handle peaks effortlessly, with modular heatsinks facilitating swaps in under 10 minutes and IP20 rating warding off shop-floor dust for MTBF over 100,000 hours.
Parker’s motion ecosystem delivers 24/7 remote diagnostics via legacy toolkits, expert factory repairs with 3-year warranties, and a global reman program for obsolescence-proofing—ensuring your Parker CP*AR-08AE-14293 powers ahead through evolving automation demands with tailored enhancements.
RELIANCE ELECTRIC 0-52854-2 NSFP 0528542
RELIANCE ELECTRIC 800082-1R USPP 8000821R
Reliance Electric Induction AC Servo VZ3000 UAZ3022 53A
RELIANCE ELECTRIC 0-57552-4A USPP 0575524A
RELIANCE ELECTRIC RECTIFIER STACK 86466-74R
Expedited shipping available
RELIANCE ELECTRIC 30V4160 AC DRIVE IN:380-460V **XLNT**
RELIANCE ELECTRIC 802420-R USPP 802420R
RELIANCE ELECTRIC 1398-DDM-150 NSFP 1398DDM150
RELIANCE ELECTRIC 0-51865-16 USPP 05186516
RELIANCE ELECTRIC 86466-75R NSFP 8646675R
RELIANCE ELECTRIC 86466-76R NSFP 8646676R
RELIANCE ELECTRIC 86466-77S NSFP 8646677S
RELIANCE ELECTRIC 801429-RE USPP 801429RE
RELIANCE ELECTRIC 801429-SE USPP 801429SE
RELIANCE ELECTRIC 0-52850 NSFP 052850
RELIANCE ELECTRIC 803456-4T USPP 8034564T
RELIANCE ELECTRIC S-D4006-C USPP SD4006C
**FS** Reliance Electric Rectifier Stack 86466-74RB
Expedited shipping available
RELIANCE ELECTRIC 57C-435 USPP 57C435
RELIANCE ELECTRIC RECTIFIER ASSEMBLY 86466-92RC
Twin City Fan and Blower, Reliance Electric Motor
