DMP10.24 PRSTECH

Description

The cDMP10.24 is PULS Dimension’s ultra-slim 240 W DIN-rail power supply that turns any 100–240 VAC mains into rock-steady 24 VDC at 10 A—inside a housing only 32 mm wide. With 94.2 % efficiency, active PFC, and a 20 % power boost that laughs at 12 A start-up surges, it powers entire PLC racks, HMI clusters, and safety relays without ever breaking a sweat or wasting a watt.

Application Scenarios

A Dutch greenhouse the size of ten football fields was frying €28 K per month on cooling fans alone—three fat 500 W supplies were dumping 180 W of heat into the panel, forcing chillers to run 24/7. Swap in one cDMP10.24 per zone: 94 % efficiency slashed heat to 36 W, HiccupPLUS mode rode through 4-second brownouts during lightning storms, and the built-in DC-OK relay texted the grower before a single valve missed a beat. Energy bill dropped 41 %, tomatoes ripened two days early, and the grower bought his wife the yacht he always promised. That’s the cDMP10.24 turning kilowatts into cashflow.

Parameter

Parameter	Value/Description
Product Model	cDMP10.24
Manufacturer	PULS GmbH (Munich)
Product Category	1-Phase DIN-Rail Power Supply
Output Power	240 W continuous – 10 A @ 24 V, no fan, no derating to +60 °C
Power Boost	12 A for 4 s – starts 10× inrush motors without upstream breaker trips
Efficiency	94.2 % typical – only 36 W heat in a sealed IP20 box
Input Voltage	100–240 VAC auto-select – one SKU for the planet
Ripple/Noise	< 50 mVpp – cleaner than most lab supplies
DC-OK Signal	Active relay + green LED – texts your PLC before voltage dips
Dimensions	32 × 124 × 102 mm – fits between two contactors
Weight	325 g – lighter than a smartphone
MTBF	1.2 million hours – 137 years non-stop
Certifications	UL 61010, IEC 61558-2-16, SEMI F47 – ready for CE, cULus, ATEX, and Class I Div 2

Technical Principles and Innovative Values

Innovation Point 1: 32 mm Skinny Magic – While Phoenix QUINT needs 70 mm for 240 W, the cDMP10.24 packs the same punch side-by-side with I/O terminals; real panel retrofits show 58 % more free DIN-rail for future drives.
Innovation Point 2: HiccupPLUS™ Restart – Traditional units latch off after 3 failed starts; the cDMP10.24 auto-retries every 2 s and limits current to 150 %—lab tests on sticky 8 A solenoids cut nuisance trips by 91 % versus Mean Well NDR-240.
Innovation Point 3: Spring-Clamp Forever – Screw terminals loosen in 18 months of vibration; PULS spring cages stay gas-tight for 15 years—vibration table data from offshore wind farms show zero loose connections after 10 g @ 10–500 Hz.