Product Introduction
The DPS2100 815.001.201 01 from LYNGSO MARINE is a state-of-the-art pressure sensor designed for use in marine and industrial applications. This sensor offers high-precision pressure measurements, making it ideal for demanding environments like offshore platforms, maritime vessels, and marine infrastructure. Built to endure the tough conditions commonly found at sea, the DPS2100 ensures reliable performance in critical operations, such as monitoring the pressure of fuel systems, water pumps, and other essential marine equipment.
The DPS2100 supports advanced communication protocols, including Modbus RTU and CANopen, enabling seamless integration with existing control systems like SCADA, PLCs, or DCS. It features a robust housing to protect against the corrosive effects of saltwater and extreme weather conditions. Whether you’re monitoring pressure levels on a boat, an offshore oil platform, or other maritime installations, the DPS2100 provides accurate, real-time data to optimize the performance and safety of your systems.
With an operating temperature range of -40°C to 70°C and resistance to high humidity, the DPS2100 is suited for both harsh marine environments and land-based industrial applications. Its easy installation and compact design make it an ideal solution for space-limited setups where performance cannot be compromised.
Core Advantages and Technical Highlights
Functional Innovation:
The DPS2100 815.001.201 01 incorporates advanced pressure sensing technology, providing highly accurate and stable readings for demanding applications. Its 4-20mA analog output and digital communication options such as Modbus RTU and CANopen make it compatible with a wide range of industrial control systems, enabling seamless integration for real-time monitoring.
Performance:
With its high-precision sensor, the DPS2100 ensures optimal pressure measurement in various environments, even in fluctuating conditions. Whether you’re monitoring the pressure of fuel lines, hydraulic systems, or water pumps, this sensor provides consistent, reliable data to keep your systems running smoothly. The DPS2100‘s ability to handle both analog and digital outputs increases flexibility and system compatibility, making it easy to incorporate into any industrial automation framework.
Reliability:
Designed to withstand the rigors of marine environments, the DPS2100 is highly resistant to humidity and saltwater corrosion. It operates over a wide temperature range from -40°C to 70°C, making it suitable for both extreme cold and heat. Its rugged design ensures long-term durability, even in harsh maritime conditions where equipment failure can result in costly downtime.
Compatibility:
The DPS2100 is built to integrate smoothly with existing industrial and marine control systems. Whether you are using a PLC, SCADA, or DCS, the sensor’s Modbus RTU and CANopen communication capabilities ensure that it fits seamlessly into your control network. This makes it easy to incorporate into both new projects and retrofitting applications.
Ease of Use:
With a user-friendly interface and easy installation, the DPS2100 can be mounted on panels or walls, offering flexible installation options. The real-time monitoring feature helps operators stay informed about the status of pressure levels without the need for constant manual checks, improving operational efficiency and safety.
Typical Application Scenarios
The DPS2100 815.001.201 01 is primarily designed for marine applications, making it ideal for offshore oil platforms, vessels, and subsea operations. It can be used to monitor pressures in hydraulic systems, water pumps, fuel lines, and other critical equipment where pressure stability is essential to operational safety. For example, the DPS2100 is perfect for use in marine fuel systems, where it can measure fuel line pressure to ensure optimal delivery to engines, reducing the risk of fuel starvation and improving system efficiency.
In marine vessel operations, the DPS2100 is commonly used to monitor pressure in engine cooling systems, ballast water systems, and hydraulic systems. By continuously monitoring these pressure levels, operators can identify potential failures before they occur, avoiding downtime and ensuring the safety of crew and equipment.
The DPS2100 is also valuable in water treatment plants and oil and gas industries, where precise pressure monitoring is critical for maintaining system integrity. It ensures that pipelines, pumps, and other vital equipment operate within safe pressure ranges, reducing the risk of damage and minimizing maintenance costs.
Related Model Recommendations
- DPS2000: A more compact version of the DPS2100, offering similar performance but designed for smaller installations or space-constrained environments.
- DPS3000: A higher-capacity model in the same series, ideal for applications requiring monitoring of multiple pressure points across larger systems.
- DPS1200: A model designed specifically for use in freshwater applications, providing similar features but with extended environmental protections for non-marine environments.
- DPS2200: A ruggedized version with additional environmental protections, including corrosion resistance, for use in extreme offshore conditions.
- DPS2105: A version of the DPS2100 offering additional diagnostic and troubleshooting features, ideal for high-availability systems.
Installation, Commissioning, and Maintenance Instructions
Installation Preparation:
Before installation, ensure that the DPS2100 is placed in a location where it is shielded from extreme environmental factors like direct sunlight or excessive moisture. The unit can be mounted on a panel or wall using standard mounting brackets. Confirm that the unit’s communication wires (Modbus RTU, CANopen) are correctly configured, and ensure the pressure input connections are securely sealed to avoid leakage.
Maintenance Suggestions:
Regular maintenance for the DPS2100 involves checking the device for physical damage and ensuring that pressure connections remain tight and free from corrosion. Clean the sensor housing periodically to prevent debris buildup, which could obstruct the sensor’s reading. Calibration checks should be performed regularly to maintain measurement accuracy. Ensure that the firmware is up to date to keep the device compatible with evolving control systems.
Service and Guarantee Commitment
LYNGSO MARINE offers a robust warranty for the DPS2100 815.001.201 01, ensuring it meets the highest standards of quality, accuracy, and durability. The product undergoes rigorous testing to ensure it performs reliably in the harshest environments, including offshore platforms and maritime vessels. LYNGSO MARINE provides comprehensive after-sales support, including technical assistance, troubleshooting, and product repairs. Should any issues arise, the company offers swift replacement or repair services to minimize downtime and ensure continuous operation. With a focus on customer satisfaction and long-term performance, LYNGSO MARINE guarantees that the DPS2100 will provide reliable and accurate pressure measurements throughout its service life.
ASEA BROWN BOVERI YB560103-CD/26 USPP YB560103CD26
ASEA BROWN BOVERI GNT0137100R0002 USPP GNT0137100R0002
ASEA BROWN BOVERI NDCU-22 USPP NDCU22
ASEA BROWN BOVERI 3HAB8797-1/2B USPP 3HAB879712B
ASEA BROWN BOVERI YB560103-CC USPP YB560103CC
ASEA BROWN BOVERI YYT-102C USPP YYT102C
ASEA BROWN BOVERI GCB6422C USPP GCB6422C
ASEA BROWN BOVERI 3HAA2121-2 NSPP 3HAA21212
ASEA BROWN BOVERI 3HAA3573-ACA NSPP 3HAA3573ACA
ASEA BROWN BOVERI 58096067 USPP 58096067
ASEA BROWN BOVERI YB560103-AM USPP YB560103AM
ASEA BROWN BOVERI YB560103-BE NSPP YB560103BE
ASEA BROWN BOVERI 3HAA3563-AMA NSPP 3HAA3563AMA
ASEA BROWN BOVERI DSQC116 USPP DSQC116
ASEA BROWN BOVERI RTO08358 USPP RTO08358
ASEA BROWN BOVERI EHDB-360C1 USPP EHDB360C1
ASEA BROWN BOVERI EH300C-YL11EX NSFP EH300CYL11EX
ASEA BROWN BOVERI NDCU-11 USPP NDCU11
