Key Technical Specifications
- Product Model: F3001020
- Manufacturer: HIMA
- System Platform: HIMatrix Safety System
- Input Voltage: 85–264 VAC universal (47–63 Hz) or 110–300 VDC
- Output Voltage: 24 VDC ±1 % (adjustable 23.5–28.5 VDC)
- Output Current: 0–20 A continuous (25 A peak for 5 s)
- Output Power: 480 W continuous
- Efficiency: > 92 % at full load
- Parallel Operation: Active current sharing ±3 %, up to 4 units in parallel (80 A total)
- Diagnostic Monitoring: Output voltage, output current, temperature, and fan status via safeethernet
- Hot-Swap: Full hot insertion/removal without system disturbance
- Ripple & Noise: < 50 mVpp
- Hold-Up Time: > 20 ms at 20 A load
- Operating Temperature: –25 °C to +70 °C (derating > 60 °C)
- Protection: Over-voltage, over-current, short-circuit, thermal shutdown (all latching)
- Safety-Related Use: Suitable as feeding source for SIL3 systems (no direct safety function, but diagnostics contribute to overall availability)
- Certifications: CE, UL 60950-1, TÜV functional safety compliance (system level), ATEX Zone 2 capable when installed in certified enclosure
- MTBF: > 750,000 hours (Siemens SN 29500 at 40 °C)
- Dimensions (W×H×D): 70 × 99 × 214 mm (fits directly into HIMatrix power supply slot)
Technical Architecture & Functional Positioning
The F3001020 is the primary power feed for all modern HIMatrix installations. Unlike conventional power supplies, it incorporates active current-sharing circuitry and continuous self-diagnostics reported over safeethernet, allowing predictive maintenance and elimination of single-point failures when used redundantly.
In redundant configuration two (or more) F3001020 modules operate in parallel with automatic load balancing and seamless transfer — removal or failure of one unit causes zero voltage dip on the 24 VDC backplane. This architecture is mandatory for SIL3/4 applications requiring > 99.99 % power availability (burner management, ESD, HIPPS, turbine control).
Typical Application Scenarios
- Redundant 24 VDC feeding of central F60 racks in large refinery ESD systems
- Single or dual supply for compact F35 controllers in offshore platform safety nodes
- High-power remote I/O stations with multiple F3 DIO/F3 AIO slices
- Critical turbine auxiliary systems requiring continuous 24 VDC without UPS
- Modernization of legacy H41q/H51q systems with significantly higher power density
Kollmorgen/Inland Motors Model 722 Precision Rate Table
Industrial Drives(Kollmorgen) SBD2-20-1101-0000023…..
KOLLMORGEN SERVO DISC DC MOTOR 00-00907-002, U9M4T
KOLLMORGEN BDS4A-206J-404A2 SERVO DRIVE RFB
Kollmorgen CR06250 Servostar Servo star drive,warranty
Kollmorgen Servostar SR10000 Y006 Drive, Wrty,fast ship
Kollmorgen rodless linear actuator 72″ travel
KOLLMORGEN INDUSTRIAL DRIVES SBD2-20-1105-W/O BOARD*RFB
Kollmorgen Servostar 600 610 S61000-SE
NEW KOLLMORGEN Servo Motor XT MTC306B1-S2C1,SHIP TODAY
Kollmorgen CR06250 CR06250-2G405A Servo Amplifier
Kollmorgen Servostar Servo drive CR03550 WRTY Fast sh
NEW KOLLMORGEN GoldLine Servo Motor B-204-B-39-016 FAST
LOT OF 4 KOLLMORGEN AKM24F-ENM2C-00 DANAHER SERVO MOTOR
Kollmorgen Servo Motor B-404S-C-93-B3-072 230V 5000 RPM
Kollmorgen Servo Amplifier BDS5A-203-00000-104A-2-020
Kollmorgen Industrial AC Servo drive Model PSR4/5A-212
Ind Drives / Kollmorgen TT-2952-1210-A DC Servo Motor
KOLLMORGEN SERVO POWER SUPPLY PSR4/5A 250
KOLLMORGEN IND TPA/2-15840-603 USPP TPA215840603
KOLLMORGEN IND 606 USPP 606
KOLLMORGEN IND CR06251-000000 USPP CR06251000000
