F650BABF2GOHI GE

Product Core Summary

Model: F650-B-A-B-F-2-G-0-HI (ordering code F650BABF2G0HI)
Manufacturer: GE Grid Solutions
Core Function: Most popular, cost-optimized multifunction feeder management relay delivering complete non-directional/directional overcurrent, thermal, reclosing, synchrocheck, and breaker control functions with universal 110–250 V DC / 100–240 V AC power supply
System Compatibility: Multilin F650 platform, EnerVista software, Modbus RTU, DNP3, IEC 60870-5-103, IEC 61850 via firmware or COMME module
Supply Status: Current production – highest-volume F650 variant, always in factory and global stock
Warranty Standard: 12-month functional warranty, fully tested on GE secondary-injection platform at 110 V DC and 230 V AC

Key Technical Specifications

Product Model: F650BABF2G0HI
Manufacturer: GE Grid Solutions
System Platform: Multilin F650 Series
Front Display: Basic alphanumeric LCD (4 lines × 20 characters)
Power Supply: HI range 110–250 V DC / 100–240 V AC (88–300 V DC / 85–264 V AC continuous), 25 VA typical
Analog Inputs: Phase CTs 1 A or 5 A (jumper selectable), neutral CT 1 A, VT input 0–250 V
Communication: 2 × RS485 rear ports (Modbus RTU / DNP3 / IEC 60870-5-103), front USB, IRIG-B unmodulated input
I/O Board: Basic “B” – 16 contact inputs (110–250 V wet), 8 standard outputs + 4 latching outputs
Protection Elements: 50P/51P, 50N/51N, 46, 49, 79 (4-shot recloser), 25 synchrocheck, 27/59, 81 O/U/R, 50BF, cold-load pickup, VTFF
Metering Accuracy: Class 0.5 % current & voltage
Recording: 479 events @ 1 ms resolution, 32-cycle oscillography (64 samples/cycle option)
Operating Temperature: –40 °C to +60 °C standard (conformal coating available)
Certifications & Standards: CE, UL/CSA, IEC 60255-27, IEEE C37.90, RCM, EAC, ATEX Zone 2 (optional)

Technical Architecture & Functional Positioning

The F650BABF2G0HI is the de-facto “workhorse” configuration of the F650 family and represents more than 60 % of all units shipped since introduction. It combines the full dual-DSP protection engine with the universal HI power supply that accepts almost any station battery or AC source worldwide, making it the default choice when no special communication, I/O, or process-bus requirements exist.

Engineers select this exact model when they need proven, drop-in replacement capability for older GE 735/750, ABB SPACOM, Siemens 7SJ, or Schneider Sepam relays while staying within standard budgets.