Key Technical Specifications
- Product Model: HIEE300523R1 PPB022BE
- Manufacturer: ABB
- System Platform: ABB Advant OCS
- Input Supply Voltage: 110 / 220 V AC (nominal, system-dependent)
- Input Frequency: 50 / 60 Hz
- Output Voltage Rails: +5 V DC, +12 V DC, −12 V DC
- Output Power Rating: Approx. 150 W total regulated output
- Voltage Regulation Accuracy: ±2% under rated load
- Ripple & Noise: <50 mVp-p on logic supply rail
- Isolation Rating: 1500 V AC between primary and secondary circuits
- Efficiency: ≥80% at nominal load
- Protection Functions: Over-voltage, over-current, short-circuit protection
- Operating Temperature: 0 to +55 °C
- Storage Temperature: −25 to +70 °C
- Mounting Type: Control rack plug-in board
- Certifications & Compliance: CE compliant, IEC 61131-2 industrial environment standards
Technical Architecture & Functional Positioning
Architecture Analysis
The PPB022BE power supply board occupies a foundational position within the ABB Advant OCS architecture, operating at the control rack infrastructure layer rather than the logic or I/O processing layer. Its primary responsibility is to convert incoming AC supply power into stable, low-noise DC voltage rails required by CPUs, communication modules, and I/O interface boards within the same rack. Because all downstream modules depend on the quality of these rails, this board is critical to overall system stability.
From a design perspective, the module uses a transformer-isolated power conversion topology combined with linear and switching regulation stages. The isolation barrier between primary and secondary circuits ensures compliance with industrial safety requirements while protecting sensitive logic circuits from line disturbances. Multiple regulated outputs are generated independently, which prevents cross-load interference when different control modules experience dynamic current changes.
The engineering value of this architecture is reliability under continuous operation. Advant OCS systems are often deployed in power generation, process industries, and heavy manufacturing environments where electrical noise, load fluctuations, and ambient temperature variation are common. By maintaining tight voltage regulation and low ripple, the board directly contributes to predictable CPU execution, stable communication timing, and reduced risk of unexplained system resets. Integrated protection circuits further ensure that a fault in one module does not cascade into a full rack failure.
Typical Application Scenarios
- Applied in thermal and hydro power plants for Advant-based turbine control cabinets, ensuring stable controller operation during load changes
- Used in petrochemical and refining DCS systems to provide regulated power for continuous process control racks
- Serves as an OEM-compatible replacement for aging Advant OCS installations requiring long-term lifecycle support
- Supports control system refurbishment projects where original power boards have reached end-of-life
- Utilized in industrial automation training and simulation platforms replicating legacy ABB control environments
BRAD HARRISON 712P801 MULTIPORT INTERCONNECT SYSTEM NIB
NIB BRAD HARRISON 712P601 MULTI-PORT SYSTEM
NEW BRAD HARRISON 14030K12M380 CABLE ASSEMBLY 38M
BRAD HARRISON 47554 USPP 47554
BRAD HARRISON 43321 USPP 43321
LOT OF 6 NEW BRAD HARRISON 43322 SAFETY-PLUGS RED
BRAD HARRISON DN11A-M500 DNET 5P MINI M/ST F/ST 50M NEW
BRAD HARRISON BTG899-FBP-10 NSFP BTG899FBP10
BRAD HARRISON CC4030A47M050 NSPP CC4030A47M050
BRAD HARRISON CC4030A54M033 NSPP CC4030A54M033
BRAD HARRISON DN8000 NSFP DN8000
Brad Harrison Top Mount 8 Outlet Connector DND8200
BRAD HARRISON 35607 NSFP 35607
BRAD HARRISON 228020A01F530 NSFP 228020A01F530
BRAD HARRISON E11A06002M760 4P CAT5E M/ST M/ST 76M NEW
BRAD HARRISON BTY801P-FBB 8 PORT PNP INTERCONNECT SYSTE
NEW BRAD HARRISON BTY801N-FBE-05 MULTI PORT BOX
BRAD HARRISON DN11A-M450 DEVICENET CORD 5P 45M NEW
LOT OF 33 ASSORTED BRAD HARRISON CABLES 12-22 AWG
BRAD HARRISON 47212 NSFP 47212
TDN-888-118 Brad Harrison DeviceNet Interconnect device
