MVI56-ADMNET PROSOFT

Model: MVI56-MNET
Brand: ProSoft Technology
Series: ControlLogix Platform (MVI56)
Core Function: Interfaces Rockwell Automation ControlLogix processors with Modbus TCP/IP networks
Type: Communication Module (Single-slot)
Key Specs: 10/100 Mbps Ethernet, Client/Server support, 5,000-word database
Condition: New Original (New Surplus), not refurbished

Product Introduction

The ProSoft MVI56-MNET allows a Rockwell Automation ControlLogix processor to communicate natively with Modbus TCP/IP devices. By functioning as both a Client and a Server, this module enables a single ControlLogix rack to aggregate data from high-precision power meters, flow controllers, and third-party PLCs over a standard Ethernet backbone.

Experienced controls engineers rely on the MVI56-MNET to bridge the gap between EtherNet/IP-based Logix systems and widespread Modbus TCP/IP field equipment. Its 5,000-register internal database ensures that large data arrays can be transferred to the processor tags without saturating the ControlLogix backplane bandwidth or complicating the ladder logic.

Key Selling Points & Differentiators

Simultaneous Multi-Role: Acts as a Modbus TCP/IP Client (Master) and Server (Slave) at the same time, simplifying complex network architectures.
Add-On Instruction (AOI) Support: Streamlines integration within Studio 5000/RSLogix 5000 environments, reducing manual tag mapping time.
Validated Performance: Each unit is tested on a 1756-A10 backplane with a continuous 24-hour Modbus polling cycle to verify thermal stability and port reliability.
Not Recommended For: Applications requiring “Class 1” implicit messaging or sub-millisecond I/O updates typical of high-speed motion axes.
Industrial Durability: Conforms to EN61000-6-4 and EN61000-6-2 standards for heavy industrial electromagnetic compatibility.

Quality Transparency Strategy (QC SOP)

Incoming Inspection: We verify the physical integrity of the 1756 backplane connector and check the serial number against ProSoft records to ensure the hardware revision is current.
Live Functional Test: Modules are powered up in a ControlLogix test rack. We perform an IP assignment via the ProSoft Configuration Builder (PCB) and verify the 10/100 Link/Activity LEDs.
Protocol Validation: We establish a Modbus TCP session with a simulator to confirm the module can successfully read/write all 5,000 internal registers without timeouts.
Electrical Parameter Tests: We measure the 5.1 V DC current draw against the 800 mA specification to ensure no internal component degradation.
Firmware Verification: The specific firmware version is recorded. If your system requires a specific “Legacy” firmware to match an existing project file, we can verify and flash this prior to shipping.
Final QC + Packaging: The module is sealed in an ESD-compliant moisture barrier bag and packed in a customized corrugated carton for secure global transit.