MVME162-213 MOTOROLA

Product Core Brief

Model: MVME162-213
Brand: Motorola Computer Group
Series: MVME162 embedded VMEbus controllers
Core Function: 68LC040 VME master/slave processor with IP expansion Ethernet SCSI
Product Type: VMEbus SBC (A32/D32:D64 master/slave, system controller capable)
Key Specs: MC68LC040 @ 25 MHz | 4 MB parity DRAM | 4 IP slots | Ethernet | SCSI
Condition: New Original (New Surplus) — verify ROM firmware and IP module compatibility

Product Introduction

Motorola MVME162-213 equips VMEbus systems with MC68LC040 processing at 25 MHz, 4 MB parity DRAM, Ethernet, SCSI, and four IndustryPack expansion slots for demanding embedded applications. The VMEchip2 ASIC enables full A32/D32:D64 master/slave operation including system controller capability with D64/MBLT transfers up to 40 MB/s peak bandwidth.

Four IP slots accept user I/O modules while onboard serial, Ethernet, and SCSI handle standard connectivity. Battery-backed SRAM/NVRAM and Flash with embedded MVME162BUG diagnostics support field maintenance and firmware updates independent of VMEbus dependency.

Frequently Asked Questions

Q: Does the MVME162-213 support hot-swapping in a VME chassis?
A: VMEbus prohibits live module insertion; power down the complete crate before installing the MVME162-213. Maximum 4.5 A @ 5 VDC loading stresses crate power supplies—post-install measure +5/+12/−12 V rails, confirm P1/P2 connector tension, monitor SYSFAIL line during power-up sequence before enabling multiprocessor arbitration.

Q: Is the MVME162-213 obsolete, and what replacement options exist?
A: Obsolete since early 2000s; MVME162 progression led to PowerPC MVME2400/2600/3600 series with PMC carriers replacing IP slots. 68LC040-to-PPC migration demands cache/MMU code changes; pin-compatible alternatives from VxWorks-era vendors require custom board support packages. Procure spares only for legacy VME sustainment.

Q: Will I lose VME application code or configuration when replacing the board?
A: Flash/EPROM and SRAM contents survive battery backup; DRAM contents clear on power loss. Primary risk involves undocumented IP slot assignments and VME address decoders—extract Flash image via BDM port, document J11-J25 jumper matrix, verify SCSI termination and Ethernet PHY strapping before field replacement.

Q: Are these MVME162-213 boards factory-new or refurbished when sold as surplus?
A: Available stock originates from decommissioned telecom VME racks as New Surplus, not active Motorola production. Require pristine P1/P2 gold fingers, post-1997 date codes on LC040/DRAM, original silkscreen for “New Original” validation; IP connector oxidation or bulging electrolytics indicate field service—demand 96-hour VMEbus burn-in certification.

Q: What warranty coverage and lead times apply to MVME162-213?
A: No Motorola/NXP factory support remains; VME specialists provide 1-year DOA replacement with comprehensive IP/VMEbus diagnostics. Immediate shipment from niche resellers, otherwise 10-18 weeks via broker networks. Field-deploy with primary/cold spare pair including matched IP modules and VxWorks boot media.