Description
- Continuous torque at standstill (60 K): 8.0 Nm
- Continuous current at standstill (60 K): 7.7 A
- Continuous torque at standstill (100 K): 9.0 Nm
- Continuous current at standstill (100 K): 8.7 A
- Maximum torque: 32.0 Nm
- Maximum current: 34.7 A
- Torque constant at 20 °C: 1.14 Nm/A
- Voltage constant at 20 °C: 70.5 V/1000 min⁻¹
- Winding resistance at 20 °C: 1.55 Ω
- Winding inductance: 6.700 mH
- Maximum speed: 6000 min⁻¹
- Encoder: Optical multiturn absolute (128 increments, Hiperface compatible)
- Shaft: Plain shaft with shaft sealing ring (no holding brake)
- Cooling: Natural convection
- Degree of protection: IP65
- Thermal time constant: 15 min
- Mass (approx.): 8.3 kg
Product Introduction
Bosch Rexroth MSK061C-0600-NN-M1-UG0-NNNN is a permanent magnet synchronous servo motor in the IndraDyn S series. It delivers high torque density for motion control in machine tools, robotics, packaging, and printing systems.
It supports IndraDrive controllers with native compatibility for SERCOS, EtherCAT, or PROFIBUS. The multiturn absolute encoder eliminates homing routines on power-up. Natural convection cooling avoids fans and reduces maintenance in clean environments. Plain shaft and no brake keep costs down where external holding is used.
National Instruments PCI-MIO-16E-1 (6070E) NI DAQ Card
National Instruments USB-8473 High-Speed CAN Interface
NATIONAL INSTRUMENTS SC-2070 INTERFACE UNIT
National Instruments NI cFP-AIO-610 Module
National Instruments PCI-GPIB IEEE 488.2 DAQ Card
National Instruments NI PCI-GPIB IEEE 488.2 Card.Tested
NATIONAL INSTRUMENTS BNC-2110 SHIELDED CONNECTOR BLOCK
National Instruments PCI-6023E
National Instruments PCI-GPIB IEEE 488 Card “Tested”
National Instruments NI cDAQ-9172 8-Slot USB Chassis
National Instruments PXI-1411 Frame Grabber
National Instruments NI PXI-1000B Embedded Computer
