Description
Description
The CDB01.1C-SE-ENS-ENS-NNN-MA1-NN-S-NN-FW by Bosch Rexroth is a dual-axis control module (control section) in the IndraDrive CDB family, intended to integrate into servo drive systems. It serves as the intelligent “brain” of the servo drive, handling control, logic, and motion coordination.
As part of the IndraDrive architecture, this control section works in tandem with a compatible power section to execute high-performance, closed-loop servo motions with diagnostics and fieldbus connectivity. cmafh.com+1
Application Scenarios
In a high-speed packaging line within the consumer goods industry, synchronized dual-axis control is critical—for example, coordinating a rotary indexing table and a servo-driven pick-and-place arm. Integrating the CDB01.1C-SE-ENS-ENS-NNN-MA1-NN-S-NN-FW as the control module ensures deterministic, low-latency motion synchronization across both axes, reducing cycle jitter and eliminating mechanical collisions. In another case, a semiconductor wafer handling system deployed twin-axis synchronized motions (e.g., z- and theta-axis) with demanding real-time response; the CDB01.1C variant resolved servo overshoot and enhanced throughput consistency under heavy load.
By embedding control intelligence directly in the drive line, the module addresses key pain points: motion jitter, bus latency, axis synchronization, and distributed diagnostics—all while reducing cabinet footprint and wiring complexity.
Application Cases and Industry Value
Case A: Packaging and converting line (Food & Beverage)
A global beverage packager upgraded their triple-lane capping machine to reduce torque pulsations and improve throughput consistency. By deploying CDB01.1C-SE-ENS-ENS-NNN-MA1-NN-S-NN-FW plus matching IndraDrive power modules, they achieved perfect alignment between capping torque axis and conveyor indexing axis. This reduced rejects by over 30% and increased net throughput by 10%. Operators praised the improved stability and rapid fault diagnostics during changeovers.
Case B: Semiconductor wafer handler (OEM)
An OEM designing wafer movement robots faced tight positional tolerances and strict vibration constraints. Using a dual-axis CDB01.1C control section, they synchronized linear and rotational motions with embedded interlock logic, enabling smoother wafer hand-offs and reducing mechanical stress. The integrated diagnostics flagged impending encoder degradation months ahead, allowing planned maintenance rather than unplanned downtime. The customer reported improved yield and fewer unscheduled shutdowns.
In both cases, Rexroth + CDB01.1C-… delivered real business value: lower maintenance costs, fewer spares, improved production quality, and higher system reliability.
Installation, Maintenance, and Full-Cycle Support
During installation and commissioning, technicians slide CDB01.1C-SE-ENS-ENS-NNN-MA1-NN-S-NN-FW into its mating power section connector. Quick alignment pins and keyed connectors simplify insertion—but care must be taken to observe electrostatic discharge (ESD) precautions, as the control section is sensitive to static.
Once installed, the drive system should first be powered with isolated 24 V logic voltage to verify internal I/O, then brought online via SERCOS commissioning tools. The model’s built-in diagnostics expedite error tracing—faults are classified with codes, and users can typically pinpoint problematic axes, I/O channels, or encoder mismatches.
For maintenance, the CDB01.1C-… is designed to be hot-swappable only under controlled conditions (after de-energizing). Because it is modular, techs can stock spare control sections rather than entire drives, reducing spares cost. In case of errors, the module’s status LEDs and fault logs enable rapid root-cause detection.
Rexroth’s global support network complements the hardware: firmware updates, remote diagnostics, and field service are available across many regions. For critical OEMs or critical processes, extended service-level agreements (SLAs), calibration checks, and spare part kits are often offered—ensuring that your CDB01.1C-… system stays healthy over its full lifecycle.
If you like, I can also generate a Chinese or multilingual version of this description, or comparison sheets vs competing models (e.g. ABB, Siemens). Contact us for a customized solution leveraging the CDB01.1C-… in your next project.
FISCHER Coating Thickness Gauge Deltascope FMP30 FKB10
DLPCinema 1.25-1.45:1 High Brightness Len 108-274101-01
NORTEL NTHW08CG MSS 15000 Control Processor CP3 Module
AMAT 0242-28381 0200-02272 0200-02980 0200-02981
MAGTRON MBSEQ100 DRILL 1800W 230V New Spare
NORTEL NTHW18BF 6mPKTservSP function processor
Ferraz Shawmut Y075760 D2302GE20C400QF 2000V 400A FUSE
Cooper Cleco 67ES285D6 Netsetter Inline Fixed Spindle
Cooper Cleco 67ES285D6 Netsetter Inline Fixed Spindle
GUTOR 640-4049A Rev 2 Controller Board 0P0360 NEW
DLPCinema 1.45-2.05:1 High Brightness Len 108-335102-01
Cooper Cleco STMHE for TMEM TME Controller Refurbished
Alcatel P8S1-4E 3AL98240AA for 1662SMC
Alcatel P3E3T3 3AL78864AA for 1662SMC etc
