Sale!
F650CFBF1G0HI10NBA GE
F650CFBF1G0HI10NBA GE - Image 2
F650CFBF1G0HI10NBA GE - Image 3

F650CFBF1G0HI10NBA GE

Original price was: $2,400.00.Current price is: $2,219.00.

Standardized Testing Protocol (SOP)

  • Visual & Mechanical Inspection: Full terminal torque verification, PCB inspection, gasket integrity
  • Burn-in: 72 h at +60 °C with continuous rail voltage and temperature logging
  • Protection Accuracy: Secondary injection of 800+ test points covering magnitude (±2 %), phase angle (±2°), and timing (±1 % or ±4 ms)
  • Recloser & Synchrocheck Validation: Complete 79 cycle simulation including fast/slow curves and 25 check logic
  • Communication Stress Test: IEC 61850 GOOSE at 1000 msg/s sustained, zero loss, plus SV and MMS client/server verification
  • Digital I/O: All 16 inputs tested at 220 V DC with supervision current, all 8 outputs at 5 A continuous + 30 A make
  • Final Documentation: Serialized test report with waveform captures, timing plots, and EnerVista backup file
Add to Quote
Category:
  • Email:sales@sxrunsheng.cn
  • Phone:+86 15340667322
  • Whatsapp：+86 15340667322

    • Description

    Technical Architecture & Functional Positioning

    The F650CFBF1G0HI10NBA is the most widely deployed F650 variant, offering the complete protection and automation feature set of the platform while reducing digital I/O to the exact quantity required for typical MV feeder and incoming breaker applications. This eliminates the cost of unused contacts found in higher I/O models (e.g., the “2G” version).

    GE retained the identical dual-processor architecture (DSP for protection, ARM for communication and logic) and the full FlexLogic™ engine, so there is zero compromise on protection speed, GOOSE performance, or custom scheme capability. Trip times remain sub-cycle (<12 ms) for close-in faults, and the relay can exchange hundreds of GOOSE messages per second without affecting deterministic protection.

    This configuration is the sweet spot for utilities and industries that need modern IEC 61850 communication, full reclosing, and advanced monitoring but rarely require more than 16 inputs or 8 outputs per bay.

    Typical Application Scenarios

    • Primary distribution feeder protection in 11–36 kV municipal and rural networks
    • Industrial plant main incoming and critical feeder protection with automatic transfer schemes
    • Compact secondary substations and ring-main units where panel space and cost are constrained
    • Retrofit of legacy static or first-generation digital relays (SPCR, KAVR, MFAC) with minimal rewiring
    • Wind and solar farm collector feeder protection with integrated fault ride-through logic

     

    Quality Standards & Testing Procedures

    Every F650CFBF1G0HI10NBA undergoes a 72-hour hardware-in-the-loop acceptance cycle on our Omicron CMC-356 + RTDS platform.

    F650CFBF1G0HI10NBA GE

    Siemens OXYMAT 5E-W Oxymat 5EW 7mb1024-0ag10-0​bc1

    NEW GE IC3600 IC3600SVSE1E IC3600SVSE SPEED SENSOR

    NEW GE IC3600 IC3600SVSE1H1D IC3600SVSE SPEED SENSOR

    Kimatek kmp4-3p2-010 Motor Control Drive

    NEW IN BOX FOXBORO 2AX-MUL 2AXMUL C0153FB REV. C

    Cutler Hamer 2147A48G01 Coil & Resistor Assy Kit NIB FS

    Siemens Switch 600 amp a 600a LXD6-A LXD62S600A NEW

    Fanuc Ethernet Remote PCB A16B-2201-0891/​04A NEW

    Cutler Hammer CB00010 CB00010-6030 SV9000 POWER BOARD

    SIEMENS 3HP MICROMASTER DRIVE 6SE32158DB40 2.2KW

    Related products