Description
- Product Model: IS220PAOCH1B
- Manufacturer: GE (General Electric)
- System Platform: GE Mark VIe / Mark VIeS Turbine & Process Control
- Module Type: Analog Output Interface Module
- Output Channels: 6–8 isolated analog output channels (configuration dependent)
- Output Signal Types: 0–20 mA current and 0–10 V voltage outputs supported
- Resolution: 12-bit digital-to-analog conversion
- Accuracy: ±0.5 % (–30 °C to +65 °C typical)
- Output Load Capability: Up to 900 Ω for current outputs, ~250 Ω for voltage outputs
- Power Supply: Nominal 24 V DC from rack backplane
- Power Consumption: <10 W
- Communication Interfaces: Dual RJ-45 Ethernet (I/O network) and support for industrial protocols (Modbus, Ethernet/IP in some configurations)
- Isolation: Galvanic isolation per output channel
- Operating Temperature Range: –40 °C to +70 °C (industrial)
- Storage Temperature: –40 °C to +85 °C
- Environmental Ratings: ATEX Zone 2 and UL certification for hazardous areas (dependent on terminal board combination)
- Connector Interface: DC-37 pin connector to terminal boards (e.g., IS200STAOH1A/IS200STAOH2A/IS200TBAOH1C)
Technical Architecture & Functional Positioning
The IS220PAOCH1B module is designed as a dedicated analog output I/O pack within GE’s Mark VIe and Mark VIeS distributed control architectures. Its principal role is to translate digital control logic outputs from the central controller into precise analog signals that drive field devices such as control valves, actuator drives, or other analog-controlled equipment. Analog outputs are fundamental in industrial automation where proportional control—rather than simple binary actuation—is required to maintain process stability, performance, and efficiency.
Structurally, this module resides in the field I/O layer of the control hierarchy. It interfaces with field hardware via isolated analog outputs and with the control network via dual Ethernet connections. The dual RJ-45 interfaces serve as part of the distributed I/O network, facilitating real-time communication with the master and redundant controllers in a Mark VIe system. Isolation per channel enhances signal integrity and equipment protection by minimizing noise coupling and ground loop issues—an essential consideration in environments with variable electrical conditions.
From a signal processing perspective, 12-bit resolution enables reasonably fine analog granularity, which is critical for smoothly controlling proportional devices. The module’s support for both current (0–20 mA) and voltage (0–10 V) output ranges ensures broad compatibility with legacy and modern actuators. Current loop outputs are particularly valuable in long-distance installations or noisy electrical environments because current signals are inherently less susceptible to voltage drop and interference.
Environmental qualifications and rugged design reflect industrial application requirements. A wide operating temperature range and conformal coating or encapsulation techniques improve reliability in conditions ranging from heavy industrial floors to offshore or petrochemical installations. ATEX and UL compliance when paired with appropriate terminal boards allow deployment in classified hazardous zones, a frequent requirement in oil, gas, and chemical processing facilities.
MKS Type 252 252C-11009 Exhaust Valve Controller *GOOD*
MKS Type 252 252D-1-VPO Exhaust Valve Controller *GOOD*
HP Agilent 16754A Module w/ 60 day Warranty
Hitachi CWS510/B CWS51 PH Rev. C CPU Module
Hitachi CWS220/A CWS22 PH Rev. B Interface
Digitest DWU tollgrade LMCCCBAAAA 900-0230 Rev B
Tektronix P6960 probe with Warranty
Olympus MSPlan 10x 0.30 ∞/- f=180 IC10 Objective
Tektronix 7T11A Sampling Sweep Unit
Nikon BD Plan 20/0.4 210/0 20x ELWD Objective NICE!!
Fujinon T10x6DA-M41 or T10x6DA-M71 TV Lens NICE
NEAT XYZ Joystick for 300 series controllers
Thorlabs WM100 Omega Meter
Tylink 7400-SNAC Network Executive SNMP Contr. MINT
HP Agilent 16712A 16710-66504 Refurb Analyzer Board
Zeiss Epiplan-Neofluar 5x/0.15 Objective inf/0 44 23 20
MOVO Servan SVDL124-P *56G2 SVDL224-P *56G2 Motor Drive
