Description
GE MV7306P16 is a medium-voltage drive power module used within the MV7000 series variable frequency drive (VFD) systems, designed for high-power motor control in heavy industrial applications such as compressors, pumps, and fans. It forms part of the drive’s modular power stack architecture.
Configured for approximately 5.8 MW output class at around 3.3 kV, this module supports scalable drive assemblies where multiple power cells operate in coordinated switching patterns. In field deployments, this modular approach reduces downtime — swap a section instead of the entire drive. Honestly, that’s a practical design choice for large plants.
Installation & Configuration Guide
Phase 1 — Pre-Installation (est. 10 min)
De-energize MV drive system. Lockout/tagout required. Wait minimum 5–10 min for DC bus discharge (check with meter). Tools: insulated HV-rated tools, torque wrench, multimeter, PPE (arc-rated). Record existing module position and wiring layout — photo everything.
Phase 2 — Removal (est. 5 min)
Label power and control connections. Disconnect bus bars and control harness. Remove mounting hardware. Extract module carefully — these units are heavy; use lifting support if required.
Phase 3 — Installation (est. 10 min)
ESD + HV safety. Confirm MV7306P16 rating matches system. Install into cabinet rails. Torque bus connections per spec (critical for heat rise). Reconnect control wiring and fiber/communication links. Verify insulation clearances.
Phase 4 — Power-On & Testing (est. 15 min)
Re-energize system gradually. Monitor DC bus voltage. Check drive diagnostics via HMI. Run motor at low speed first; verify current balance across phases. Increase load stepwise. Confirm stable operation >30 min and log results.
Troubleshooting quick-reference:
• Drive trips immediately → check bus connection torque and insulation
• Uneven current → verify module alignment and control signals
• Overtemperature → inspect cooling path and airflow
Stainless Steel/Copper Baffle for Diffusion Pump 35″ASA
Busch Panda Blower WV1000
NASH DUPLEX VACUUM PUMP PACKAGE
LEYBOLD-HERAEUS WA2000 ROOTS VACUUM PUMP – REFURBISHED
VACU-VEST #20 VACUUM INVESTMENT MIXER WITH BUSCH PUMP
Edwards BOC L70 Dry Semiconductor Vacuum Pump
Leybold TRIVAC D65BCS / WS501 Roughing Pump and Roots B
Tuthill vacuum air blower pump compressor 7018-21L2++++
Oerlikon Leybold TW 701 Vacuum Turbo Pump
Rebuilt by Oerlikon Leybold with a one year warranty.
Edwards iQDP80 Dry Semiconductor Vacuum Pump w iQMB-500
APPLIED MATERIALS, AMAT 0010-21668 PVD magnet. New
NASH TCM3 VACUUM PUMP 30 HP
BOC Edwards Vacuum EPX 180N Dry Pump
EDWARDS EXP TURBO SYSTEM
Edwards Vacuum EPX 180L Dry Pump 400V, 6 month Warranty
New Leybold Turbovac 1000C vacuum pump with controller
incl. Leybold Turbotronik NT1000/1500 VH includes cable
Balzers DIFF500A Diffusion Pump 500mm (20″)
