Description
Maximum operating pressure (measuring points): 315 bar / 4,500 psi
• Over-pressure zone (measuring points): 450 bar to 570 bar range
• Connection size: G1/4 BSPP ports
• Number of pressure measuring points: 6 stations
• Tank / drain connection: 1 port
• Seal material: Viton (likely)
• Fluid temp range: –20 °C to +70 °C
• Mounting: Flange mounting via bolts
• Weight: ~1.6–1.8 kg
• Intended use: Gauge isolation to protect instruments
Product Introduction
Hydac MSL 2 A 2.0/315/4570 is a multi-station hydraulic gauge isolator manifold designed for industrial fluid systems. It isolates up to six pressure measuring points while allowing accurate gauge indication at pressures up to 315 bar (4,500 psi). The valve block mounts via flange hardware and uses G1/4 BSPP ports.
This isolator manifold helps protect pressure instruments from direct media exposure and leakage during maintenance. Its Viton-compatible seals and –20 °C to +70 °C fluid temperature range suit mineral oil and typical hydraulics. Use proper torque and sealing per HYDAC catalog when installing.
CB-100 Breakouts w National Instruments R1005050 1meter
NEW National Instruments NI 181065 GPIB-PCIIA ISA Card
NATIONAL INSTRUMENTS SCXI-1163R 32 CHANNEL S/S RELAY
National Instrument AMUX-64T analog multiplexer
DB9S Solder Cup & Encl for National Instruments #100542
National Instruments: 763061-0 Type X2 1.1 Meter Cable
SAVE $500 National Instruments NI BNC-2096
National Instruments 777501-02 AT-485I/2 Rev. X10
National Instruments NB-GPIB Mac NuBus Card
National Instruments PCI-8431/2 RS-485 2-Port Serial
LOT 2 NATIONAL INSTRUMENTS 185196A CABLE 1M SH6868-8DB9
National Instruments NI PCI-6033E 16 Bit FREE W W SHIP
