Description
ProSoft MVI56-MNET is an industrial communication gateway module designed to connect PLC platforms—particularly Allen-Bradley/ControlLogix environments—to Modbus TCP/IP networks for data exchange with field devices, SCADA systems, and remote controllers. It installs directly into the host system architecture and handles protocol conversion at the module level.
Built for mixed-protocol environments, it supports Modbus TCP client/server operations and Ethernet connectivity, enabling integration between legacy PLC systems and modern IP-based networks. In field deployments, this module typically reduces integration time by centralizing protocol handling inside the rack rather than external gateways — a practical design choice.
Phase 1 — Pre-Installation (est. 10 min)
De-energize rack. Wait 5 minutes. Tools: laptop with RSLogix, Ethernet cable, label tags, screwdriver, multimeter. Back up PLC program and existing communication mapping. Photograph slot position and wiring.
Phase 2 — Removal (est. 5 min)
Label Ethernet and serial connections. Release module latch and pull straight out from backplane. Inspect connector pins — bent pins here will cost you hours later.
Phase 3 — Installation (est. 10 min)
Wear ESD strap. Confirm correct slot and module type. Insert until latch clicks. Connect Ethernet cable to network switch. Configure IP address, Modbus mapping, and communication parameters using RSLogix and ProSoft tools.
Phase 4 — Power-On & Testing (est. 15 min)
Apply power (backplane supply). Check status LEDs. Verify IP connectivity (ping test). Establish Modbus session with client/server devices. Validate register reads/writes. Run system for >30 minutes and confirm stable polling.
Troubleshooting quick-reference:
• No comms → check IP, subnet, switch port
• Timeout errors → verify Modbus addressing and polling rate
• PLC not seeing data → check tag mapping and module configuration
Enlarge
Shimadzu Turbopump TMP-3403LMTC rebuilt 3620-00486
Pfeiffer Vacuum Turbopump TMH 1001P rebuilt
Oerlikon Leybold TMP 1100C Turbo Vacuum Pump Rebuilt
1 Year Warranty; Leybold Factory Rebuild
One-day shipping available
Vacuum pump, single stage liquid ring
Single Stage Liquid Ring
Enlarge
Kinney KT300 Rotary Piston Vacuum Pump
Edwards iQDP80 Dry Semiconductor Vacuum Pump iQMB 1200
Body for Nash 1251 liquid ring compressor, SS
LEYBOLD TURBO PUMP 1000C PN A971300407 – REFURBISHED
BOC EDWARDS iQDP80/QMB250 DRY VACUUM PUMP AND BOOSTER
VACUUM PUMP SYSTEM
Enlarge
EDWARDS QDP40 DRY VACUUM PUMP BRAND NEW ( NEVER USED )
AMERICAN VACUUM COMPANY VACUUM PUMP MODEL 4206
CVC Diffusion Vacuum Pump – 35″ Inner Diameter
