Sale!
ABB REF615C HCFFAEAGANB2BAN1XC | Direct Replacement 1-Year Warranty
ABB REF615C HCFFAEAGANB2BAN1XC | Direct Replacement 1-Year Warranty - Image 2
ABB REF615C HCFFAEAGANB2BAN1XC | Direct Replacement 1-Year Warranty - Image 3

ABB REF615C HCFFAEAGANB2BAN1XC | Direct Replacement 1-Year Warranty

Original price was: $7,657.00.Current price is: $5,578.00.

Product Core Brief

  • Model: HCFFAEAGANB2BAN1XC (REF615C-C)
  • Brand: ABB
  • Series: Relion® 615 (REF615C)
  • Core Function: Feeder protection relay with non-directional overcurrent and earth-fault protection
  • Type: Feeder Protection & Control IED (Configuration C)
  • Key Specs: Non-directional O/C (50/51) + E/F (50N/51N); directional options; 12 BI + 10 BO; 48–250 V DC supply; 1/5 A CT inputs
  • Condition: New Original (New Surplus) — not refurbished
Add to Quote
Category: SKU: REF615C HCFFAEAGANB2BAN1XC ABB
  • Email:sales@sxrunsheng.cn
  • Phone:+86 15340667322
  • Whatsapp：+86 15340667322

    • Description

    Installation & Configuration Guide

    Phase 1—Pre-Installation

    • De-energize the bay. Lockout/tagout.
    • Wait 5 min for discharge.
    • Export the existing relay program from PCM600.
    • Photograph DIP switches, wiring, and rack layout.
    • Tools: Fluke 115 multimeter, ESD wrist strap, torque driver (0.5 N·m), label tags.

    Phase 2—Removal

    • Label wires before disconnecting.
    • Release the DIN rail latch.
    • Pull the unit perpendicular to the backplane.
    • Inspect backplane connector pins for bent contacts or corrosion.

    ABB REF615C HCFFAEAGANB2BAN1XC | Direct Replacement 1-Year Warranty

    Phase 3—Installation

    • Put ESD protection on first. Wrist strap + ESD mat.
    • Verify part number HCFFAEAGANB2BAN1XC.
    • Replicate jumper and terminal settings from photos.
    • Seat the module until the latch clicks.
    • Reconnect wiring at about 0.5 N·m.
    • Check shield grounding against the wiring diagram.

    Phase 4—Power-On & Testing

    • Verify supply voltage before energizing (48–250 V DC).
    • Observe LEDs: green = RUN, red flash = ERR, amber flash = DIAG.
    • Connect PCM600 and confirm firmware version.
    • Download the application.
    • Test I/O points, comms, and one full control loop.
    • Confirm 30 min stable operation.
    • Log the swap in the maintenance record.

    Related products