Description
Product Introduction
Does an unexpected drive trip on your specialized IMA automated line bring production throughput to a complete halt? The KEB 10.S4.D30-347M is a customized COMBIVERT S4 frequency inverter built specifically for IMA packaging and woodworking machinery.
Automation engineers rely on the KEB 10.S4.D30-347M to maintain precise closed-loop speed control and dynamic torque response across high-duty motor axes. Operating on a 3-phase 305–440 VAC supply, the drive processes rapid acceleration and deceleration commands while keeping motor thermal stress within safe limits.
Key Selling Points & Differentiators
- Programmed with IMA OEM-specific motor parameters and fieldbus profiles (IMA Part No. 91834) for fast drop-in commissioning.
- Thoroughly bench-tested under dynamic motor loads; full current injection and thermal logging reports supplied prior to shipment.
- Supports high-frequency output scaling up to 400 Hz for high-speed motor spindles and packaging feed rolls.
- Not recommended for standard off-the-shelf applications expecting generic factory KEB firmware without checking parameter tables.
- Built in full compliance with EN 61800-3 electromagnetic compatibility standards for industrial drive systems.
Quality Transparency SOP
- Incoming Inspection: Serial number and OEM suffix cross-reference against factory databases; visual check of power terminals, DC bus capacitor tops, fan blades, and heatsink fins.
- Live Functional Test: Mounted on a KEB test bench connected to a 3-phase induction motor. Verified power-on boot sequence, display navigation, digital I/O responsiveness, and 0–400 Hz frequency output sweep. Held under continuous load run for 24 hours while recording drive temperature rise.
- Electrical Parameter Tests: Megger insulation check performed at 500 VDC (>10 MΩ target) across main line inputs, motor output terminals, and ground earth.
- Firmware / Configuration Verification: Read out internal firmware revision build (e.g., V1.3) and record parameter profiles using KEB COMBIVIS software.
- Final QC + Packaging: QC sign-off completed, drive sealed inside an ESD shielding bag, wrapped in heavy protective foam, and packed into a reinforced carton with a dated QC Pass sticker.
