Sale!

Kongsberg RDI-32 32-Channel Digital Input | Factory Sealed Fast Ship

Original price was: $6,575.00.Current price is: $3,450.00.

Product Core Brief

  • Model: RDI-32 8100154
  • Brand: Kongsberg
  • Series: Remote I/O Modules
  • Core Function: Acquires 32 digital input signals for marine automation
  • Type: Remote Digital Input Module
  • Key Specs: 32 channels, 18–32 V DC supply, CAN Open interface
Category: SKU: RDI-32 KONGSBERG
  • Email:sales@sxrunsheng.cn
  • Phone:+86 15340667322
  • Whatsapp:+86 15340667322
  • Description

    Product Introduction

    Marine automation systems lose visibility when input modules drop out. The Kongsberg RDI-32 8100154 collects 32 digital signals from field devices and transmits them over redundant CAN Open to the control system. It fits engine rooms, pump stations, and auxiliary systems on vessels.

    This unit handles dry contacts or active signals depending on variant. It operates reliably from −15 to +70 °C with full self-diagnostics and time-stamping. In field use, the plug-in terminals and status LEDs speed up fault finding. Bottom line — it delivers clean data without constant babysitting.

    nstallation & Configuration Guide

    Phase 1 — Pre-Installation (est. 10 min): De-energize the cabinet. Wait 5 minutes for discharge. Export current configuration. Photograph all wiring, CAN terminations, and module settings. Gather tools: torque screwdriver, wrist strap, Fluke 115 multimeter.

    Phase 2 — Removal (est. 5 min): Label every wire and CAN cable. Disconnect pluggable terminals. Release DIN rail latch. Pull the module straight out. Check backplane or connector pins for wear.

    Phase 3 — Installation (est. 10 min): Use ESD protection. Verify part number and revision. Replicate wiring exactly from photos. Seat firmly until latched. Torque terminals to 0.5 N·m. Double-check CAN bus termination (120 Ω at ends only).

    Phase 4 — Power-On & Testing (est. 15 min): Apply 24 V DC within tolerance. Confirm green power LED and CAN status. Connect to host system. Verify all 32 channels via engineering station. Test full signal loop. Run stable for 30+ minutes and log the swap.

    Troubleshooting quick-reference: No comms → check CAN wiring, termination, and node address. ERR LED → power or sensor excitation overload. Input not detected → verify signal type matches module variant.

    Kongsberg RDI-32 32-Channel Digital Input | Factory Sealed Fast Ship

    Agastat Timer 7012PF 1-10 MIN 120VDC Coil 7012-PF

    Westinghouse DSL Limiter A400 400a 400 a amp 140D316G05

    Foxboro Module for Board Card 2AC NIB

    Siemens Reversing Contactor CRL0F4322 120v coil NEW

    New Rosemount 3244MV-F1K504 Temperature 3244MVF1K504

    Square D FAL34060 Circuit Breaker, 60 Amp, NEW!

    3007-125-A FMC Technologies Robot Teach Pendant Control

    Allen Bradley SLC500 1747-L30B 30 I/O Processor

    Ingersoll Rand D.C. MOTOR SYSTEM 93938736 DC DRIVE

    New Allen Bradley 800T-FXP16RA1 Illuminated Push Button

    Leukhardt IDC 142-2 S01 IDC142-2S01 502087.008 NEW

    MSC Board IDC 16 S02.02 0250012. 066 IDC16S02.02 NEW

    NEW ZIATECH ZT8825 AM1 BMO8 REV A.5 MEMORY BOARD

    Fanuc GMF ROBOTICS Power Supply EE-0874-020

    MTS Semipower 3hp 3 hp DriveBlok Drive ADM1003ECSWC00S

    SIEMENS 6ES7-221-1EF00-​0XA0 6ES72211EF000XA​0

    Raritan Computer RCI Master Console MC2E

    RELIANCE ELECTRIC BOARD 0-51831-1 51831-1 0518311

    Siemens Rev Reversing Contactor CRL0F4322 120v coil NEW

    Reliance VSDC Card Module Board 0-52859-2 0528592 52859

    Allen Bradley Contactor 100-C60DQ100 100-C60D*00 B NEW

    Siemens Contactor 3TF50 220/240v coil

    PULSATROL Pulsafeeder 100 Series MBC110 1 phase

    Agastat Timer 7012AFL 1-10 MIN 120V Coil