Description
- Continuous torque at standstill 60 K (M0_60): 8.0 Nm
- Continuous current at standstill 60 K (I0_60): 7.7 A
- Continuous torque at standstill 100 K (M0_100): 9.0 Nm
- Continuous current at standstill 100 K (I0_100): 8.7 A
- Continuous torque at standstill surface cooled (M0_S): 12.0 Nm
- Continuous current at standstill surface cooled (I0_S): 11.6 A
- Maximum torque (Mmax): 32.0 Nm
- Maximum current (Imax): 34.7 A
- Torque constant at 20 °C (KM_N): 1.14 Nm/A
- Voltage constant at 20 °C (KEMK_1000): 70.5 V/1000 min⁻¹
- Winding resistance at 20 °C (R12): 1.55 Ω
- Winding inductance (L12): 6.700 mH
- Moment of inertia rotor without brake (Jrot): 0.00075 kg·m²
- Holding brake torque: 10.0 Nm (electrically released, 24 V)
- Maximum speed (nmax): 6000 min⁻¹
- Degree of protection: IP65
- Thermal time constant (Tth): 15.0 min
- Mass (without brake / with brake): 8.3 kg / 8.8 kg
- Ambient temperature operation: 0 … 40 °C
- Encoder: Multi-turn hiperface (M1), 128 signal periods
- Shaft: Plain with shaft sealing ring (U)
- Holding brake: Electrically released, 10 Nm (G1)
(Values from Bosch Rexroth project planning manual R911296289; verify with latest OEM datasheet before final design.)
Product Introduction
The Bosch Rexroth MSK061C-0600-NN-M1-UG1-NNNN is a permanent magnet synchronous servo motor in the IndraDyn S series. It provides high dynamic performance and precise positioning in automation setups like CNC machinery, handling systems, and printing equipment when connected to IndraDrive drives.
It includes a multi-turn hiperface encoder for absolute positioning over multiple revolutions, natural convection cooling, plain shaft with sealing ring, and an integrated 10 Nm holding brake. This setup maintains IP65 protection, supports 400–480 V supplies, and delivers higher speed capability than lower winding codes while adding brake functionality for vertical or safety-critical axes.
National Instruments CPCI-GPIB Card
National Instruments PXI-1002 PXI Chassis with Plug-Ins
National Instruments PCI-6032E with software
National Instruments IMAQ-A6822- new in box, sealed.
National Instruments PXI-6224 Multifunction DAQ 32-Chan
National Instruments PCI-GPIB IEEE 488.2 DAQ Card
National Instruments PCI-DIO-96 Digital I/O Board
National Instruments CB-68T CA-1000 Enclosure
National Instruments NI USB-6008
NI National Instruments BNC-2081 Connector Block 2080
NATIONAL INSTRUMENTS PCI-7030/6030E REAL TIME MF DAQ
National Instruments LAB-PC-1200 Multifunction I/O Card
NATIONAL INSTRUMENTS SCXI-1162HV 32-CHANNEL INPUT
National Instruments AT-MIO-16F-5 Data Acquisition Sys
National Instruments AT-GPIB IEEE-488.2 ISA Card
National Instruments PCMCIA DAQCard AI-16XE-50 NI DAQ
National Instruments SCXI-1162 32 Channel DI Module
National Instruments 3′ I/O Cable
National Instruments NI PCI-6519 16-In/16-Out Isolated
National Instruments DAQCARD-6024E
