Sale!

RDI-32XE Kongsberg Dry Contact Module 333523 | Genuine 1-Year Warranty

Original price was: $7,686.00.Current price is: $3,223.00.

Product Core Brief

  • Model: RDI-32XE 333523
  • Brand: Kongsberg
  • Series: Remote I/O Modules
  • Core Function: Reads 32 dry contact digital inputs for marine systems
  • Type: Remote Digital Input Module
  • Key Specs: 32 dry contact channels, 18–32 V DC, dual CAN Open
Category: SKU: RDI-32XE KONGSBERG
  • Email:sales@sxrunsheng.cn
  • Phone:+86 15340667322
  • Whatsapp:+86 15340667322
  • Description

    Product Introduction

    Field signals disappear fast when input modules fail in tight engine control rooms. The Kongsberg RDI-32XE 333523 reads 32 dry contact inputs and sends them via redundant CAN Open to the host automation system. It targets vessels and offshore platforms needing reliable discrete monitoring.

    This dry contact version draws about 1.5 mA per active channel. It runs from −15 to +70 °C and includes per-channel LEDs plus time-stamping. In my experience, the pluggable terminals cut swap time on live systems. Bottom line — it gives clean, timestamped data day after day.

    Installation & Configuration Guide

    Phase 1 — Pre-Installation (est. 10 min): De-energize the I/O cabinet. Wait 5 minutes. Export current node settings. Photograph wiring, CAN bus, and any address switches. Prepare tools: torque driver, wrist strap, Fluke 115 multimeter.

    Phase 2 — Removal (est. 5 min): Tag all wires and CAN cables. Unplug terminals. Release DIN rail latch. Pull module straight out. Inspect connectors.

    Phase 3 — Installation (est. 10 min): Apply ESD strap. Confirm exact part number and revision. Copy settings from photos. Seat until latch clicks. Torque to 0.5 N·m. Verify 120 Ω termination at bus ends only.

    Phase 4 — Power-On & Testing (est. 15 min): Supply 24 V DC ±10 %. Check power and CAN LEDs. Link to K-Chief or host. Scan all 32 channels. Test one full signal loop. Run 30+ minutes stable then log the change.

    Troubleshooting quick-reference: No comms → verify CAN cables, termination, and node ID. ERR LED → check power supply or overload. Input ignored → confirm dry contact wiring matches xe variant.

    RDI-32XE Kongsberg Dry Contact Module 333523 | Genuine 1-Year Warranty

    Honeywell Mirco Switch SSPE0100V FAP0150 NIB

    SMC Guide Block Cylinder MGPM25-30 1.0 MPa NEW

    Gould Modicon B353 24vdc Input Module

    Devilbiss Lubricator 1/2 HAL-515 250 1/2HAL-51520 NEW

    Siemens 5SM2 322-0 RC Unit with (2) 5SY62 MCB C10

    Sierra Scientific PreAmp Board 4528 0630431 NEW

    NEW ALLEN BRADLEY 800T16HA17KB6AX 800T-16HA17KB6A​X

    Nemic Lambda Power Supply HR-9F-24 HR9F24 120v 24v NEW

    Siemens Reversing Contactor 3RA1317-8XB30-1​AK6 NEW

    Allen Bradley Contactor 100-C30ZJ10 100-C30Z*00 C NEW

    GE PC Board Card ic3600 IC3600AIAD1B OBSOLETE AS IS

    Agastat Timer 7012PC 1.5-15 Sec 120VDC Coil 1.5 – 15

    Square D Push to Test Pilot Light 9001 TP-21R2 NIB