Sale!
REF615C-E HCTJBABAABC2DNNIIE ABB
REF615C-E HCTJBABAABC2DNNIIE ABB - Image 2
REF615C-E HCTJBABAABC2DNNIIE ABB - Image 3

REF615C-E HCTJBABAABC2DNNIIE ABB

Original price was: $7,686.00.Current price is: $3,235.00.

Product Core Brief

  • Model: HCTJBABAABC2DNNIIE (REF615C-E)
  • Brand: ABB
  • Series: Relion® 615 (REF615C-E)
  • Core Function: Feeder protection and control relay for MV distribution systems
  • Type: Feeder Protection & Control IED
  • Key Specs: Overcurrent (50/51), earth-fault (50N/51N), voltage/frequency protection; 10 kV–35 kV nominal voltage; 1/5 A CT inputs; 48–250 V DC supply
  • Condition: New Original (New Surplus) — not refurbished
  • Warranty: 1 year
Add to Quote
Category: SKU: REF615C-E HCTJBABAABC2DNNIIE ABB
  • Email:sales@sxrunsheng.cn
  • Phone:+86 15340667322
  • Whatsapp：+86 15340667322

    • Description

    Product Introduction

    ABB REF615C-E HCTJBABAABC2DNNIIE is a high-performance integrated protection relay for medium-voltage distribution systems (10 kV–35 kV). It integrates protection, control, measurement, monitoring, and communication in one device.

    This REF615C-E variant provides directional and non-directional overcurrent and earth-fault protection, plus voltage, frequency, and power-based protection. It supports IEC 61850 Editions 1 and 2 (including HSR/PRP, GOOSE, IEC 61850-9-2 LE), Modbus, DNP3, and IEC 60870-5-103. The compact withdrawable-unit design speeds field swaps. Honestly, that cuts commissioning time when you’re under live-line pressure.

    REF615C-E HCTJBABAABC2DNNIIE ABB REF615C-E HCTJBABAABC2DNNIIE ABB

    Installation & Configuration Guide

     

    Phase 1—Pre-Installation

    • De-energize the bay. Lockout/tagout.
    • Wait 5 min for discharge.
    • Export the existing relay program from PCM600.
    • Photograph DIP switches, wiring, and rack layout.
    • Tools: Fluke 115 multimeter, ESD wrist strap, torque driver (0.5 N·m), label tags.

     

    Phase 2—Removal

    • Label wires before disconnecting.
    • Release the DIN rail latch.
    • Pull the unit perpendicular to the backplane.
    • Inspect backplane connector pins for bent contacts or corrosion.

     

    Phase 3—Installation

    • Put ESD protection on first. Wrist strap + ESD mat.
    • Verify part number HCTJBABAABC2DNNIIE.
    • Replicate jumper and terminal settings from photos.
    • Seat the module until the latch clicks.
    • Reconnect wiring at about 0.5 N·m.
    • Check shield grounding against the wiring diagram.

    Related products