Description
- Continuous torque at standstill (60 K): 12.0 Nm
- Continuous current at standstill (60 K): 12.2 A
- Continuous torque at standstill (100 K): 13.5 Nm
- Continuous current at standstill (100 K): 13.7 A
- Maximum torque: 43.5 Nm
- Maximum current: 54.9 A
- Torque constant at 20 °C: 1.14 Nm/A
- Voltage constant at 20 °C: 70.5 V/1000 min⁻¹
- Winding resistance at 20 °C: 0.71 Ω
- Winding inductance: 4.700 mH
- Maximum speed: 5000 min⁻¹
- Encoder: Optical multiturn absolute Hiperface, 128 increments
- Shaft: Plain shaft with shaft sealing ring
- Holding brake: Electrically released, 11 Nm holding torque
- Cooling: Natural convection
- Degree of protection: IP65
- Thermal time constant: 60 min
- Mass (approx.): ~10-12 kg (including brake; verify exact with OEM)
Product Introduction
Bosch Rexroth MSK076C-0450-NN-M1-UG1-NNNN is a permanent magnet synchronous servo motor in the IndraDyn S series. It delivers mid-range torque for motion control in machine tools, robotics, packaging equipment, and printing systems.
It integrates with IndraDrive controllers via SERCOS, EtherCAT, or PROFIBUS. The multiturn absolute encoder retains position over power cycles—no homing required. Built-in 11 Nm holding brake holds vertical loads securely. Plain shaft with sealing ring suits standard couplings; natural convection cooling fits sealed enclosures without added fans.
NATIONAL INSTRUMENTS SCXI-1162HV 32-CHANNEL INPUT
National Instruments Daqcard PCI-6024E NI Daq w/ SW
National Instruments PXI-8330 MXI-3 Interface for PXI
NATIONAL INSTRUMENTS BNC-2081 BREAKOUT BOARD BNC-2080
NATIONAL INSTRUMENTS BNC-2081 BREAKOUT BOARD BNC-2080
National Instruments GPIB-1014P
NATIONAL INSTRUMENTS DAQ BLOCKS CB-50LP CABLE CA-1000
National Instruments NI AT-GPIB/TNT Plug and Play
National Instruments PC-DIO-96/PnP card
National Instruments SC-2051 Cable Adapter w/NB1 Cable
National Instruments GPIB Bulkhead Adapters (QTY 2)
National Instruments PXI-8464 CAN/XS, Series 2, 1-Port
NATIONAL INSTRUMENTS GPIB to USB Adapter
National Instruments NB1, 50-Pin Ribbon Cable 0.4-Meter
National Instruments AT-GPIB/TNT Plug & Play 183663B-01
