REM615 HBMCAEAGBCC6АNN1XG ABB

Product Core Brief

Model: REM615 HBMCAEAGBCC6АNN1XG
Brand: ABB
Series: Relion 615 Series
Core Function: Medium-voltage motor protection with integrated monitoring
Type: Motor Protection and Control Relay
Key Specs: IEC 61850 communication, 1 A / 5 A CT inputs, optional arc flash mitigation
Condition: New Original (New Surplus) — not refurbished
Lead Time: Typically 3–10 working days depending on stock region
Warranty: 12 months standard seller warranty
Pricing Note: Reference pricing only; actual quote depends on firmware version, stock condition, and destination.

Product Introduction

For medium-voltage motor feeders in industrial plants, the ABB REM615 HBMCAEAGBCC6АNN1XG relay integrates protection, control, and monitoring in one compact withdrawable unit. It belongs to ABB’s Relion 615 series and meets IEC 61850 communication standards.

Trip response is under 25 ms for typical overload conditions. Thermal and voltage protection logic is included. Withdrawable design allows offline testing without disconnecting the backplane. This layout is actually clever during maintenance because it reduces downtime on live systems.

Installation & Configuration Guide

Phase 1 — Pre-Installation (est. 10 min)

De-energize cubicle; wait 5 min for capacitor discharge
Use insulated tools, ESD wrist strap, Fluke 115 multimeter
Export relay settings, save disturbance records
Photograph DIP switches, terminal blocks, and rack layout

Phase 2 — Removal (est. 5 min)

Label all wires
Release withdrawable latch, pull perpendicular
Inspect backplane pins, ground contacts, and fiber ports

Phase 3 — Installation (est. 10 min)

Verify part number, firmware version, and CT/VT ratios
Replicate DIP/jumper settings from photos
Seat until latch clicks, torque terminals ~0.5 N·m
Confirm shield grounding and fiber orientation

Phase 4 — Power-On & Testing (est. 15 min)

Confirm 24 V DC ±10% control power
Observe LEDs: Green = RUN, Red flash = ERR, Amber flash = DIAG
Connect PCM600, read and download settings
Functional tests: I/O simulation, full motor start sequence, thermal overload alarms
Run 30-min stability check
Record firmware and test results in maintenance log

Electrical Tests: