Sale!
ABB PP883 3BSE092979R1 | Industrial WXGA Operator Panel 24V DC
ABB PP883 3BSE092979R1 | Industrial WXGA Operator Panel 24V DC - Image 2
ABB PP883 3BSE092979R1 | Industrial WXGA Operator Panel 24V DC - Image 3

ABB PP883 3BSE092979R1 | Industrial WXGA Operator Panel 24V DC

Original price was: $6,756.00.Current price is: $3,433.00.

Product Core Brief

  • Model: PP883
  • Brand: ABB
  • Series: Panel 800 (High-Performance/Rugged)
  • Core Function: Advanced human-machine interface designed for high-vibration and demanding industrial environments.
  • Type: Widescreen Rugged Touchscreen HMI
  • Key Specs: 12.1″ TFT-LCD, 1280 x 800 WXGA resolution, 1.0 GHz ARM Cortex-A8.
  • Condition: New Original (New Surplus), not refurbished
Add to Quote
Category: SKU: PP883 3BSE092979R1
  • Email:sales@sxrunsheng.cn
  • Phone:+86 15340667322
  • Whatsapp：+86 15340667322

    • Description

    Product Introduction

    In maritime and heavy-duty processing, the ABB PP883 (3BSE092979R1) serves as a specialized visualization node capable of withstanding environmental stresses that standard panels cannot. While it shares the 12.1-inch WXGA footprint of its siblings, this ruggedized variant is engineered with enhanced vibration resistance and an IP66-rated front bezel for superior washdown protection.

    Integrating the ABB PP883 (3BSE092979R1) into a control network ensures reliable data logging and high-speed screen updates via its 1.0 GHz processor. With a 1.5 GB flash memory capacity, the unit manages large driver libraries and complex historical trend data without the latency common in entry-level hardware.

     

    Key Selling Points & Differentiators

    • Ruggedized Construction: Certified for higher vibration thresholds and harsher washdown conditions (IP66) compared to the standard PP881.
    • Verified Dielectric Strength: Each unit passes a 500 V DC insulation test and ground continuity check to ensure safety in high-noise electrical environments.
    • Redundant Networking: Equipped with dual Ethernet ports to facilitate network separation or ring-topology redundancy for high-availability systems.
    • Not for Cryogenic Environments: Operation is rated for 0 to 50°C; do not install in sub-zero cold storage without specialized external heating enclosures.
    • Global Marine Standards: Built to meet major classification society requirements (DNV, GL, LR, ABS) for bridge and engine room deployments.

     

    Quality Transparency Strategy

    For critical spare procurement, we verify every ABB PP883 (3BSE092979R1) through a documented multi-step engineering protocol:

    1. Incoming Inspection: We check for factory seal integrity and perform a detailed visual audit of the front overlay and rear thermal heat sinks for any signs of aging.
    2. Live Functional Test: The module is powered on a dedicated 24 V DC test bench to verify the Linux kernel boot sequence and perform a full-surface touch calibration check.
    3. I/O Verification: All physical ports—including both Ethernet ports and the serial terminal—are tested for data handshake stability using standardized industrial protocols.
    4. Firmware Documentation: We read and record the pre-installed firmware version (e.g., V2.0). If your system requires a specific legacy version, we verify this prior to shipping.
    5. Final QC + Packaging: The unit is placed in a moisture-barrier ESD bag, shielded with high-density foam, and marked with a “QC Passed” label including the technician’s signature.

     

    “Old-Hand” Technical Pitfall Guide

    1. Firmware Revision Mismatch: If your Panel Builder project was developed on an older software suite, it may not run on a newer ABB PP883 (3BSE092979R1) without a project conversion. Always verify your software version before site deployment.
    2. ❗ Gasket Seating: Because the ABB PP883 (3BSE092979R1) is often used in IP66 environments, ensure the mounting surface is perfectly flat. A warped door panel will prevent the gasket from sealing, leading to moisture ingress and internal board corrosion.
    3. Power Supply Stability: Industrial HMIs are sensitive to 24 V “droop” during heavy motor starts. Ensure your power supply has at least 20% headroom; we recommend a minimum 2.5 A dedicated supply for this unit.
    4. Connector Orientation: The 3-pin power connector is keyed, but forcing it incorrectly can damage the internal pins. Always check the polarity markings (+ / – / FE) printed on the chassis.
    5. ESD Precautions: I’ve seen communication boards fail weeks after installation because they were handled without a wrist strap during commissioning. Static damage is often latent, not immediate.

    ABB PP883 3BSE092979R1 | Industrial WXGA Operator Panel 24V DC

    AA4VG56EP1D1/32​R-NSC52F003DHS BOSCH REXROTH

    JVL MAC800-DC5 SERVO MOTOR BOSH REXROTH LINEAR SLIDES
    QUANTITY 4, TESTED, SUPERB CONDITION

    AA4VG56HD1DT1/3​2L-NSC52F004S-S AXIAL PUMP BOSCH REXROTH

    NEW REXROTH INDRAMAT MHD112C-035-PG3​-BN SERVO MOTOR
    One-day shipping available

    AA4VG56EP1D1/32​L-NSC52F005DH-S PUMP BOSCH REXROTH

    AA4VG56EP3D1/32​L-NSC52F003DH-S PUMP FOR BOSCH REXROTH 1

    AA4VG56EP3D1/32​L-NSC52F003DH-S PUMP BOSCH REXROTH

    R902111779 PUMP FOR BOSCH REXROTH

    AA4VG56EP3D1/32​L-NSC52F003D-H PISTON PUMP BOSCH REXROTH

    AA4VG56EP1D1/32​L-NSC52F003DHS PUMP BOSCH REXROTH

    Rexroth 4WS2EM10A-42/60​B3ET315Z8CM Servo Valve Rebuilt

    Rexroth 4WS2EM10-42/45B​2ET315K8DM Servo Valve New

    Rexroth 4WS2EM10-40/60B​2ET315K8D/M Servo Valve Rebuilt

    Rexroth 4WS2EM10-45/75B​2ET315K8DM Servo Valve Rebuilt

    A6VE55EP6/63W-V​ZL027B PISTON MOTOR BOSCH REXROTH

    Related products