Sale!
ABB REF615 HBFFAEAGNDC6ACB11G | Factory Sealed New Original
ABB REF615 HBFFAEAGNDC6ACB11G | Factory Sealed New Original - Image 2
ABB REF615 HBFFAEAGNDC6ACB11G | Factory Sealed New Original - Image 3

ABB REF615 HBFFAEAGNDC6ACB11G | Factory Sealed New Original

Original price was: $8,797.00.Current price is: $6,756.00.

Product Core Brief

  • Model: HBFFAEAGNDC6ACB11G
  • Brand: ABB
  • Series: Relion® 615 (REF615)
  • Core Function: Feeder protection and control relay for utility and industrial feeders
  • Type: Feeder Protection & Control IED
  • Key Specs: IEC 61850, Modbus, DNP3; directional and non-directional overcurrent/earth-fault protection; sensor or conventional instrument transformer support
  • Condition: New Original (New Surplus) — not refurbished
Add to Quote
Category: SKU: REF615 HBFFAEAGNDC6ACB11G ABB
  • Email:sales@sxrunsheng.cn
  • Phone:+86 15340667322
  • Whatsapp：+86 15340667322

    • Description

    Product Introduction

    ABB HBFFAEAGNDC6ACB11G is a REF615 feeder protection relay for MV feeder protection, control, measurement, and supervision in utility and industrial networks. In practice, this unit fits radial, looped, and meshed distribution systems.

    From a procurement view, this one matters because it supports sensor or conventional instrument transformer inputs, IEC 61850 Ed. 1/2, and Modbus/DNP3 communications. The relay comes in a withdrawable plug-in design, which cuts swap time in the panel. Well, technically that helps maintenance speed; it does not remove the need to confirm firmware and application settings first.

    ABB REF615 HBFFAEAGNDC6ACB11G | Factory Sealed New Original

    Installation & Configuration Guide

     

    Phase 1—Pre-Installation (est. 10 min)

    • De-energize the bay.
    • Wait 5 min for discharge.
    • Export the existing relay program.
    • Photograph DIP switches, wiring, and rack layout.
    • Tools: Fluke 115 multimeter, ESD wrist strap, torque driver, label tags.

     

    Phase 2—Removal (est. 5 min)

    • Label wires before disconnecting.
    • Release the latch.
    • Pull the unit straight out.
    • Inspect backplane pins for bent contacts, oxidation, or heat marks.

     

    Phase 3—Installation (est. 10 min)

    • Put ESD protection on first.
    • Verify the exact part number.
    • Replicate jumper and terminal settings from photos.
    • Seat the module until the latch clicks.
    • Reconnect wiring at about 0.5 N·m.
    • Check shield grounding against the wiring diagram.

    Related products